Planet Networking & Communication ICA-1200 User Manual page 59

Note!! That it must make sure that the Firmware only applies to this device, once update, it
will be burned into FLASH ROM of system.
Warning!!! The download firmware procedure cannot be interrupted. If the power and/or
network connection are broken during the download procedure, it might possibly cause
serious damage to the device.
Please be aware that you should not turn off the power during updating the firmware and wait
for finish message. Furthermore, do not try to upgrade new firmware if it's not necessary.
System Restart
6. Once the firmware file was selected, select "Upgrade".
7. The upgrade progress information will be displayed on the
screen.
8. A message will be shown while the firmware upgraded.
Once the upgrading process completed, the device will
reboot the system automatically.
9. Please wait for 80 seconds, and then you can use PLANET
IPWizard II to search the device again.
The device is restarted without changing any of the settings.
59
Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200