Planet Networking & Communication ICA-1200 User Manual page 42

Site survey
Interface Select
Type
Security mode
Obtain DNS from
DHCP
SSID
Channel
WEP settings
Click the "Reload" button. It will refresh information window which list is
the result of a network scan. Access points with a disabled SSID
Broadcast will not appear unless the camera is associated with it. The
following information is provided:
"Wired (Ethernet) only" or "Auto – wired if cable connected, otherwise
wireless":
Choose wired or wireless mode. However, note that wired is priority.
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Shows which type of security the network uses. The device supports
three security methods: None, WEP, WPA_PSK, WPA2_PSK
Enable this checked box when a DHCP server is installed on the
network and provide DNS service.
This is the name of the wireless network the device is configured for.
The field accepts up to 32 alphanumeric characters. The name must be
exactly the same as that used in the wireless access point, or the
connection will not be established.
Leaving this field blank means the device will attempt to access the
nearest open network.
Chooses the wireless channel in use currently.
- Authentication:
Select Open or Shared Key System Authentication, depending on the
method used by your access point. Not all access points have this
option, in which case they probably use Open System, which is
sometimes known as SSID Authentication.
- WEP Mode:
The key types available depend on the access point being used. The
following options are available:
•ASCII - In this method the string must be exactly 5 characters for
64-bit WEP and 13 characters for 128-bit WEP.
•HEX - In this method the string must be exactly 10 hexadecimal (0-9,
A-F) characters for 64-bit WEP and 26 hexadecimal characters for
128-bit WEP.
- Web Key 1~4:
Key value of WEP.
42
Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200