Planet Networking & Communication ICA-1200 User Manual page 43

WPA settings
Obtain IP address
automatically (DHCP)
IP address, Subnet
mask, and Gateway
Wireless configuration step
1. Press Reload button detects wireless AP.
2. Press Easy Installation to into setup procedure.
3. Fill correct SSID then press Go Step 2 button.
4. Select correct security and WPA mode and WPA key then press Submit button.
- WPA Key:
Key value of WPA. The device uses a pre-shared key (PSK) for key
management. The pre-shared key can be entered either as Manual
hex, as 64 hexadecimal characters, or as a Passphrase, using 8 to 63
ASCII characters.
Enable this checked box when a DHCP server is installed on the
network to issue IP address assignment. With this setting, the IP
address is assigned automatically.
If you do not select Obtain an IP address automatically, then you need
to enter these network parameters manually.
43
Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200