European Union Directive Information - Emerson Smart Wireless Gateway Reference Manual

Appendix B: Product certifications
April 2013
North American certifications
N5
Canadian Standards Association (CSA)
N6
B.5

European Union Directive Information

The EC declaration of conformity for all applicable European directives for this product can be
found on the Rosemount website at www.rosemount.com. A hard copy may be obtained by
contacting your local sales representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX Directive.
Electro Magnetic Compatibility (EMC) (2004/108/EC)
Emerson Process Management complies with the EMC Directive.
Radio and Telecommunications Terminal Equipment Directive (R&TTE)(1999/5/EC)
Emerson Process Management complies with the R&TTE Directive
European certification
N1
64
FM Division 2, Non-Incendive
Certificate Number: 3028321
Nonincendive for Class I, Division 2, Groups A, B, C, and D.
Suitable for Class II, III, Division 2, Groups E, F, and G.
Enclosure Type 4X
Temperature Code: T4 (-40 °C  T
CSA Division 2
Certificate Number: 1849337
Suitable for Class I, Division 2, Groups A, B, C, and D.
Install per Rosemount drawing 01420-1011.
Temperature Code: T4 (-40 °C  T
CSA Enclosure Type 4X
ATEX Type n
Certificate Number: Baseefa 07ATEX0056X
ATEX Marking: II 3 G
Ex nA nL IIC T4 (-40 °C  T
Special condition for safe use (X):
The surface resistivity of the antenna is greater than one gigaohm. To avoid electrostatic
charge build-up, it must not be rubbed or cleaned with solvents or a dry cloth.
The Apparatus is not capable of withstanding the 500V insulation test required by Clause
9.4 of EN 60079-15: 2005. This must be taken into account when installing the apparatus.
 60 °C)
a
 60 °C)
a
 60 °C)
a
Reference Manual
00809-0200-4420, Rev GA
Product certifications