Auto Connection Function (Only For Ios) - Star Micronics SM-T300I SERIES Hardware Manual

2.2.2 Auto Connection Function (only for iOS
When the Bluetooth connection with your iOS device
connection by tapping the printer you want to use on the Bluetooth setting screen. This Re-Connec-
tion Specification is exactly based on the iOS specifications, and this specification is different from
other OS such as Android.
The auto connection eliminates this configuration process and automatically sends a request for con-
nection to the iOS terminal (Host) that the printer previously connected.
See the table below for details of Auto Connection setting.
How to re-connect
How to change
the Host
Use case
ON/OFF switching can be done by a panel operation.
Details are indicated in the page 11 "2.4 Memory Switch Setting".
(*1: This function is enabled only when the Communication mode of the printer is set to iOS mode
[Bluetooth(iAP)]. When the Communication mode is not set to iOS mode, it is disabled and de-
leted from the self-test result even if it is set to ON with the memory switch setting.
(*2: For example, iPhone, iPad and iPod
Au to Co n ne c ti o n O F F
Turn the printer on and tap the
printer name on the Bluetooth
setting screen of the iOS device.
Turn the printer on and tap the
printer name on the Bluetooth
setting screen of the iOS device
you want to use.
A printer is shared with the multi-
ple host devices.
- 8 -
*1 )
is disconnected, it is required to establish a
(*2
Auto Co nne c t i o n ON
A f t e r p o we re d o n , t h e p r i n t e r
a u to m at i c a l l y co n n e c t s to t h e
Host that it previously connected.
Turn the "Bluetooth" function off
on the Bluetooth setting screen
o f t h e h o s t t h a t t h e p r i n t e r i s
currently connected, and then tap
the printer name on the Bluetooth
setting screen of the iOS device
you want to use.
A printer is always used with one
host device only.
( Defalt)