Daewoo DPP-42A1LASB Service Manual page 73

2. Technical Feature
PDP Module is a display device to be divided into a Panel part and a Drive part. The Panel part consists of
Electrodes, Phosphor, various dielectrics and gas, and the Drive part includes electronic circuitry and PCB.
PDP42V7#### model produced in the LG electronic is 42inches color Plasma display module of WVGA(852(H)x480(V)), and it is a
display device giving concrete to bright image by using AC Plasma technology of LG electronic.
1) General Specification
(1) Model Name
(2) Number of Pixel
(3) Pixel Pitch
(4) Cell Pitch
(5) Display area
(6) Outline dimension
(7) Color arrangement
(8) Number of COLRO
(9) Weight
(10) Aspect Ratio
(11) Peak Brightness
(12) Contrast Ratio
(13) POWER CONSUMPTION
(14) Lifetime
2) Block Diagram
LVDS Input
Controller Signal
* Note 1) It can be changed maximum 300W according to input image.
: PDP42V7####
: 852(H) x 480(V) (1pixel=3 RGB cells)
: 1080μ m(H) x 1080μ m(V)
: 320μ m(H) x 1080μ m(V) (Base: Green Cell)
: 920.1(H) x 518.4(V)±0.5mm
: 1005(H) x 597(V)x 60.6(D)±1mm
: RGB Closed type
: (R)1024 x (G)1024 x (B)1024
: 14.7Kg±0.5Kg
: 100Kg±5Kg(5EA/1BOX)
: 16:9
: Typical 1500dc/㎡(1/10 White Window)
: Avergae 100:1(Light room 100 Lx at center)
: Typical 10000:1(Dark room 1/10 White Window)
(White Window Pattern at Center)
: Typical 200 W(Full White) * Note 1)
: Over 60,000 Hrs (Initial brightness 1/2)
- 5 -
Mentioned voltage follows
a standard of each Board input voltage
Full White standard