Page 1
PLASMA TELEVISION USER MANUAL D P A - 5 0 3 4 L D S Proper use guarantees product life. Before using the product, be advised that you read this user manual well and try to operate it.
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is lntended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Page 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
Page 4
CCF Technology makes the picture clearer by controlling of the brightness among three different color filters. • MGDI (Meta Genuine Digital Image) Engine MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid, and delicated images. • BBE(Bass Boost Effect) Sound Effect This User Manual presents safety precautions and how to use the product.
Page 5
F C C R F I N T E R F E R E N C E S T T E M E N T F C C R F I N T E R F E R E N C E S T T E M E N T NOTE : This equipment has been tested and found to comply with the limits for a...
Page 6
Safety Precautions Power Always obey all During a lightning storm, or when it is left When unplugging your TV, always grip unattended and unused for a long period plug firmly and pull straight out from the safety messages. of time, unplug it from the wall outlet. receptacle.
Page 7
During Use Do not open the cover (or back) Never push any kind of objects into because high voltage is present this product through openings at the within the TV enclosure. back of TV. It may cause electric shock. It may cause fire or electric shock. The apparatus shall not be exposed to Do not allow children to play or hang Do not place a candle or lighted...
Page 8
Safety Precautions Power Always obey all When moving your TV, remove the power Do not touch the power plug with wet plug, antenna, and cables, and be sure to hands when plugging or unplugging it safety messages. move it by using two people.. into the wall socket.
Page 9
During Use Do not wipe the TV using a cloth Do not place heavy objects or heat damped with chemicals (benzene, sources on the power cord. thinner, etc.). TV appearance may be marred. It may damage the power cord, causing fire (Unplug the power plug and wipe with soft or electric shock.
Page 10
Checking Accessories Note Check to be sure that the following items are packed with your Plasma panel. Supplied Accessories Remote Control 1 UNIT Ferrite Core 2UNITS Place the small ferrite cores in the speaker cables close to the speaker terminals of Component Cable (Option) 1UNIT the PDP unit.
Page 11
Note The following items are optional accessories. Refer purchasing optional accessories from Optional Accessories Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Speakers Table Top Stand Wall Mounting Unit 11 11...
Page 12
CONTENTS PREPARATION 6 • Safety Precautions 10 • Checking Accessories 14 • Panel Controls 15 • Remote control 16 • Remote Control Setup CONNECTION 17 • Antenna Connection 20 • To Watch TV 22 • Channel Setup 28 • Watching Digital Broadcasts 30 •...
Page 13
Antenna Connection Outdoor Antenna Connection when watching both analog and digital broadcasts through outdoor antenna connection Connect a antenna coaxial cable to the input terminal Select Input Start Ant. setup Video Analog ant. Digital ant. Audio Ant. 2 Active Ch. setup Start Fine tune Channel...
Page 14
Shared Antenna Connection when watching both analog and digital broadcasts through antenna connection in your apartment. Please contact your apartment office for terrestrial digital broadcast. Connect the TV's antenna 1 to the antenna socket as shown figure Select Input Ant. setup Start Video Analog ant.
Page 15
Watching Cable Broadcasts with cable broadcast receiver When receiving digital broadcasts from a cable broadcast. Please contact your local cable TV company for terrestrial digital broadcast. Connect signal divider and coaxial cables as shown figure Select Input Ant. setup Start Video Analog ant.
Page 16
Watching Cable Broadcasts without cable broadcast receiver When receiving digital broadcasts from a cable broadcast. Please contact your local cable TV company for terrestrial digital broadcast. Connect the TV's antenna 1 to the antenna socket as shown figure. Select Input Start Ant.
Page 17
Watching Digital Broadcasts Through Digital Antenna Use digital(only) antenna when your local cable broadcast company does not transmit digital broadcasts or unable to receive digital broadcasts over the existing antenna. Use UHF antenna for digital(only) antenna. Install the antenna where there aren't any obstacles. It may be difficult to receive for areas with many signal obstacles.
Page 18
Connecting Antenna Output Terminal(Recoding etc.) Use this feature when record TV broadcast to external recording devices. Connect signal divider and coaxial cables as shown figure. Turn on the TV and the device. From the menu select channel. then choose "Antenna 2" from analog antenna/digital antenna "Air"...
Page 19
Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 20
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, different input modes appear. The sequence is as follows: Video1 Video2...
Page 21
Watching Digital Broadcasts Connect a Digital Broadcasting Receiver to the Watching Digital • Prepare supplied A/V cables. Broadcasts • Connect the cables from the Digital TV Receiver output terminal to the PDP(Component 1, 2) input terminal. • To watch digital •...
Page 22
Input Select • Select [Component 1 or Component 2] by pressing the “Multimedia” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “Multimedia” button, different input modes appear. The sequence is as follows: Component1 Component2...
Page 23
Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 24
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, different input modes appear. The sequence is as follows: Video1 Video2...
Page 25
Watching Satellite Broadcasts Connect a Satellite Broadcasting Receiver to the PDP. Watching Satellite • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 26
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...
Page 27
Watching a DVD Image Connect a DVD Player to the PDP. Watching a DVD • Prepare the AV cable. Image • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 28
Input Select • Select [Component 1 or Component 2, Video1, Video2] by pressing the “MULTIMEDIA” or “TV/VIDEO” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP set. • Each time you press the “MULTIMEDIA” or “TV/VIDEO”...
Page 29
Watching a VCR Image Connect a VCR to the PDP. Watching a • Prepare the AV cable. VCR Image • Connect the Video(Output) to PDP(Video Input) as shown below. • Video can use either the video terminal or the S-video terminal. POWER VIDEO/ CATV...
Page 30
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the “TV/VIDEO” button of Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...
Page 31
Watching a Camcorder/Game Console Image Connect a Camcorder/Game Console to the PDP. Watching a Camcorder/Game • Prepare the AV cable. Console Image • Connect the Video(Output) to the PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
Page 32
Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the “TV/VIDEO” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...
Page 33
Connecting PC(15pin D-sub) Before connecting to the PDP, set the resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • This product •...
Page 34
Press the Power Buttons. • Turn on the PDP and the PC. POWER POWER Input Select • Select [PC] by pressing the “MULTIMEDIA” button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2...
Page 35
Connecting PC(DVI) Before connecting to the PDP, set the resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • This product • In the SETTINGS Menu, select 640 x 480 or 800 x 600. supports resolution of VGA, SVGA, XGA, SXGA.
Page 36
Press the Power Buttons. • Turn on the PDP and the PC. POWER POWER Input Select • Select [DVI] by pressing the “MULTIMEDIA” button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2...
Page 37
PC and DVI Input Resolution Available in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark 640x480 31.469...
Page 38
Connecting Dolby digital Amp. Connecting coaxial digital audio output to dolby digital Amp. enables you yo hear enhanced sound.(Dolby digital sound is output only when it is receiving digital broadcasts) When both Optical/Coaxial are connected Coaxial has priority. Note. For digital sound, dolby digital or PCM is possible...
Page 39
Panel Controls Front Panel, Back Panel, Remote Control Items having same names on Plasma television and the remote control would function in exactly the same way. Front ON/OFF STAND BY/OPERATE • Power control sensor • Select when adjusting volume or Power Standby: Red - Standby select/adjust “MENU.”...
Page 40
Remote Control Note Use two AAA batteries. Be sure to use replacement batteries The number in ( ) indicates the page in the of the same type as the original ones. function of each button is explained in detail. The life of a battery depends on how much it has been used.
Page 41
MUTE PROG.GUIDE F.R/SLOW PLAY F.F/SLOW Video Function STOP PAUSE (F.R/PLAY/F.F/REC/STOP/PAUSE) PREV OPEN/CLOSE NEXT DVD Function (PREV, OPEN/CLOSE, NEXT) PICTURE SOUND MODE MODE SLEEP Picture Mode Sleep Sound Mode Position Swap PIP POSITION SWAP Sub Ch VIDEO TV/Video ADD/ MTS CAPTION ERASE Add/Erase Caption...
Page 42
IR receiver of the device. If the code is set properly, use the device after power on. Contact to Daewoo Electronics Service Center to get the Remote Control Setup Code. DISPLAY...
Need help?
Do you have a question about the DPA-5034LDS and is the answer not in the manual?
Questions and answers