Trouble Shooting
B) Z-SUS, Digital B/D, Data B/D Shut Down
Check Start
Turn on the set after AC power on
N
Y
Is 'SHUT DOWN' occured?
Turn AC power off
Turn AC power off
Connect P2 of Z-SUS B/D
Replace Z-SUS B/D
Connect P2, P3 back and turn on the
Turn on the set after AC power on
set after AC power on
Y
N
Y
N
Is 'SHUT DOWN' occured?
Is 'SHUT DOWN' occured?
Replace Digital B/D
Replace Data B/D
Go back to 'Low Voltage Shut
Connect all cables and set
Down' part again
voltage switch to High
Connect all cables and set
Connect all cables and set
voltage switch to High
voltage switch to High
Done
Done
Done
-50-