Daewoo PXT-42BSTD Instruction Manual
  1. Manuals
  2. Brands
  3. Daewoo Manuals
  4. Plasma TV
  5. PXT-42BSTD
  6. Instruction manual
Daewoo PXT-42BSTD Instruction Manual

Daewoo PXT-42BSTD Instruction Manual

Plasma display tv stand
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PLASMA TELEVISION
USER MANUAL
D T S - 4 2
Proper use guarantees
product life.
Before using the product, be advised
that you read this user manual well and
try to operate it.

Advertisement

Table of Contents
loading

Related Manuals for Daewoo PXT-42BSTD

Summary of Contents for Daewoo PXT-42BSTD

  • Page 1 PLASMA TELEVISION USER MANUAL D T S - 4 2 Proper use guarantees product life. Before using the product, be advised that you read this user manual well and try to operate it.
  • Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is lntended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

  • Page 3: Important Safety Instructions

    Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
  • Page 4 F e a t u r e s F e a t u r e s • 42” VGA wide Plasma Panel • Built in Analog Tuner PDP has the analog tuner inside for watching terrestrial broadcasting without the need to purchase a separate broadcasting receiver.
  • Page 5 F C C R F I N T E R F E R E N C E S T T E M E N T F C C R F I N T E R F E R E N C E S T T E M E N T NOTE : This equipment has been tested and found to comply with the limits for a...

  • Page 6: Safety Precautions

    Safety Precautions Power Always obey all During a lightning storm, or when it is left When unplugging your TV, always grip unattended and unused for a long period plug firmly and pull straight out from the safety messages. of time, unplug it from the wall outlet. receptacle.
  • Page 7 During Use Do not open the cover (or back) Never push any kind of objects into because high voltage is present this product through openings at the within the TV enclosure. back of TV. It may cause electric shock. It may cause fire or electric shock. The apparatus shall not be exposed to Do not allow children to play or hang Do not place a candle or lighted...
  • Page 8 Safety Precautions Power Always obey all When moving your TV, remove the power Do not touch the power plug with wet plug, antenna, and cables, and be sure to hands when plugging or unplugging it safety messages. move it by using two people.. into the wall socket.
  • Page 9 During Use Do not wipe the TV using a cloth Do not place heavy objects or heat damped with chemicals (benzene, sources on the power cord. thinner, etc.). TV appearance may be marred. It may damage the power cord, causing fire (Unplug the power plug and wipe with soft or electric shock.

  • Page 10: Checking Accessories

    Checking Accessories Note Check to be sure that the following items are packed with your Plasma panel. Supplied Accessories Ferrite Core 2UNITS Remote Control 1 UNIT Place the small ferrite cores in the speaker cables close to the speaker terminals of Component Cable 1UNIT the PDP unit.
  • Page 11 Note The following items are optional accessories. Refer purchasing optional accessories from Optional Accessories Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Speakers DTS-42SP - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.37(W) x 24.72(H) x 3.27(D) inch - Dimension Including Speaker Stand : 170(W) x 729(H) x 194(D) mm...

  • Page 13: Table Of Contents

    CONTENTS PREPARATION 6 • Safety Precautions 10 • Checking Accessories 14 • Panel Controls 15 • Remote control 16 • Remote Control Setup CONNECTION 17 • Antenna Connection 20 • To Watch TV 22 • Channel Setup 28 • Watching Digital Broadcasts 30 •...

  • Page 14: Panel Controls

    Panel Controls Front Panel, Back Panel, Remote Control Items having same names on Plasma television and the remote control would function in exactly the same way. Front ON/OFF STAND BY/OPERATE • Power control sensor • Select when adjusting volume or Power Standby: Red - Standby select/adjust “MENU.”...

  • Page 15: Remote Control

    Remote Control Note • Use two “AAA” batteries. • Be sure to use replacement batteries of the same type as the original ones. The number in ( ) indicates the page in which • The life of a battery depends on how much the function of each button is explained in detail.

  • Page 16: Remote Control Setup

    Remote Control Setup Remote control supporting the multi brand devices. - The remote control provided is designed to operate the Daewoo PDP set. - However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control.

  • Page 17: Antenna Connection

    Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing.
  • Page 18 CTV Antenna Connection TV Antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly. It is recommended to use the provided coaxial cable. ANT/CABLE 1 Provided coaxial cable When a feeder cable is used ANT/CABLE 1...
  • Page 19 Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 Separate Antenna Connection. ANT/CABLE 1...

  • Page 20: To Watch Tv

    To Watch TV To Watch TV - The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller. Press the “ON/OFF” button of the PDP unit.
  • Page 21 Press the “ON/OFF” button. • Press the “ON/OFF” button of the PDP set. ON/OFF • The main power lamp turns on in red color. • Press the "POWER" button of the remote control or any button POWER in the keypad of the main body. •...

  • Page 22: Channel Setup

    Channel Setup Automatic Channel Memory - This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply find out channels with “ CH ” buttons and so need not to select channels by pressing each channel number. Press the “Menu”...
  • Page 23 Select the [Auto Search]. • Select the “Auto Search” with the “ CH ” button. Ch Mode Channel Picture Memory MENU Sound Fine Tune Auto Search Screen Features Channel Adjust Exit Move MENU Press the “VOL ” button. • By pressing the “VOL ” button automatically searches OnAir Channel as in the right.
  • Page 24 Additional Channel Memory Select the Channel to memorize. Additional • Select the Channel by pressing the Channel Memory number button. Ex) “13” channel • This is method for additionally memorizing C H 1 3 channels not M O N O P M 1 2 : 0 0 memorized due to weak N o R a t i n g s broadcasting signal.
  • Page 25 Erase of Memorized Channel Select the Channel to erase. Erase of Memorized • Select the Channel to erase with the Channel “ CH ” button. • You may select the Channel by pressing • the number button. This is function to MENU Ex) “13”...
  • Page 26 Fine Tune - If you are unable to get a good picture or sound because of a poor signal reception, it is possible to adjust it with the Fine Tune feature.. Select the [Channel] with the “Menu” button and the “ VOL ” button. •...
  • Page 27 Select “Air/Cable” in [Ch Mode]. • This function is used for selecting “Air TV” and “Cable Ch Mode TV” Channel Picture • The screen is changed to “Air Memory MENU Sound TV” and “Cable TV” whenever Fine Tune Auto Search pressing the “...

  • Page 28: Watching Digital Broadcasts

    Watching Digital Broadcasts Connect a Digital Broadcasting Receiver to the Watching Digital • Prepare supplied A/V cables. Broadcasts • Connect the cables from the Digital TV Receiver output terminal to the PDP(Component 1, 2) input terminal. • To watch digital •...
  • Page 29 Input Select • Select [Component 1 or Component 2] by MULTIMEDIA pressing the “Multimedia” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “Multimedia” button, different input modes appear. The sequence is as follows: Component1 Component2...

  • Page 30: Watching Cable Broadcasts

    Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
  • Page 31 Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, different input modes appear. The sequence is as follows: Video1 Video2...

  • Page 32: Watching Satellite Broadcasts

    Watching Satellite Broadcasts Connect a Satellite Broadcasting Receiver to the PDP. Watching Satellite • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
  • Page 33 Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the TV/VIDEO button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...

  • Page 34: Watching A Dvd Image

    Watching a DVD Image Connect a DVD Player to the PDP. Watching a DVD • Prepare the AV cable. Image • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
  • Page 35 Input Select • Select [Component 1 or Component 2, MULTIMEDIA Video1, Video2] by pressing the “MULTIMEDIA” or “TV/VIDEO” button of the Remote Control or the "INPUT TV/VIDEO SELECT" Key in KeyPad of the PDP set. • Each time you press the “MULTIMEDIA” or “TV/VIDEO”...

  • Page 36: Watching A Vcr Image

    Watching a VCR Image Connect a VCR to the PDP. Watching a • Prepare the AV cable. VCR Image • Connect the Video(Output) to PDP(Video Input) as shown below. • Video can use either the video terminal or the S-video terminal. POWER VIDEO/ CATV...
  • Page 37 Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the “TV/VIDEO” button of Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...

  • Page 38: Watching A Camcorder/Game Console Image

    Watching a Camcorder/Game Console Image Connect a Camcorder/Game Console to the PDP. Watching a Camcorder/Game • Prepare the AV cable. Console Image • Connect the Video(Output) to the PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colors. •...
  • Page 39 Input Select • Select [Video 1 or Video 2] by pressing TV/VIDEO the “TV/VIDEO” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the pdp set. • Each time you press the “TV/VIDEO” button, a different input mode appears. The sequence is as follows: Video1 Video2...

  • Page 40: Connecting Pc(15Pin D-Sub

    Connecting PC(15pin D-sub) Before connecting to the PDP, set the resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • This product •...
  • Page 41 Press the Power Buttons. • Turn on the PDP and the PC. Input Select • Select [PC] by pressing the “MULTIMEDIA” MULTIMEDIA button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2...

  • Page 42: Connecting Pc(Dvi

    Connecting PC(DVI) Before connecting to the PDP, set the resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY Menu. • This product • In the SETTINGS Menu, select 640 x 480 or 800 x 600. supports resolution of VGA, SVGA, XGA, SXGA.
  • Page 43 Press the Power Buttons. • Turn on the PDP and the PC. Input Select • Select [DVI] by pressing the MULTIMEDIA “MULTIMEDIA” button of the Remote Control or PDP unit. • Each time you press the “MULTIMEDIA” button, a different input mode appears. The sequence is as follows: Component1 Component2...
  • Page 44 PC and DVI Input Resolution Available in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark 37.861 VESA...

  • Page 45: Selecting Picture Mode

    Selecting Picture Mode Selecting Picture Mode Selecting Picture • Press the [PICTURE MODE] on the Mode PICTURE Remote Control. MODE • While pressing the [PICTURE MODE] for • Select the Picture mode the first time, the current PICTURE MODE that is appropriately set will be displayed.

  • Page 46: Customizing Picture

    Customizing Picture Press the MENU Button. Customizing • The MENU shown below will display on the screen. Picture Mode Normal • You can adjust the Brightness Picture MENU color tone and Contrast brightness to your Sound Color preference. Tint Screen Sharpness Color Temp.
  • Page 47 Select User Mode Adjustments • While you are in [Picture Mode – User], press the “ ” buttons to select a specific adjustment item. MENU Mode User Brightness Picture Contrast Sound Color Tint Screen Sharpness Color Temp. Normal Features Channel Move Adjust Exit...

  • Page 48: Adjusting Screen Size

    Adjusting Screen Size Press the “SCREEN SIZE” Button. Adjusting Screen Size • Each time you press the “SCREEN SIZE” button on the Remote Control, a different “SCREEN SIZE” appears. The sequence • You can adjust used is as follows: screen size or •...
  • Page 49 Press the MENU Button. Adjusting from • Press the [MENU] button on the Remote Control. MENU Screen Mode Normal Brightness Picture MENU Contrast • Available Screen Mode Sound Color Input Available Mode Tint Screen Sharpness H, V Size Color Temp. Normal H, V Size and Features...

  • Page 50: Adjusting Screen Size(Pc, Dvi)

    Adjusting Screen Size(PC, DVI) Press the MENU Button. Adjusting Screen • The MENU screen as shown below will appear. Position and Size Mode Normal • You can adjust the Brightness MENU Picture screen position and Contrast size as desired. Sound Color Tint Screen...
  • Page 51 Press the Volume “ VOL ” button. • Press the Volume “ VOL ” button to enter the sub menu of [Screen]. • While you are in [Screen] mode, press the “ CH ” button to select a desired item, and then, adjust the MENU value by pressing the “...

  • Page 52: Enlarging Screen Size

    Enlarging Screen Size Press the “ZOOM+” Button. Enlarging • Press the “ZOOM+” button to show currently selected Screen Size screen size. • Each time you press the “ZOOM+” button, the screen size • You can view will increase stepwise in 0 ~ 20 scale. enlarged size of the •...
  • Page 53 Move the Screen Position. • While you are in the ‘Zoom’ mode, press the “ CH ” and “ VOL ” buttons to move screen stepwise up/down and left/right, respectively. MENU Zoom NOTES: 1) When the screen is enlarged, the pixel of the screen can become thick and dim.

  • Page 54: Watching A Still Image

    Watching a STILL Image Press the “STILL” Button. Watching a • If you wish to freeze a picture, press the “STILL” button. Still Image You can still hear the sound. STILL • Press “STILL” button to cancel the “STILL” function. •...

  • Page 55: Adjusting Auto Sound Mode

    Adjusting Auto Sound Mode Select "SOUND MODE". Adjusting Auto • Press the "SOUND MODE" on the Sound Mode SOUND Remote Control. MODE • Current sound mode will be • Enjoy various sound displayed. modes by selecting your favorite Sound Mode depending on the kinds of moving pictures.

  • Page 56: Customizing Sound Mode

    Customizing Sound Mode Press the MENU Button. Customizing • The MENU Screen as below will be displayed. Sound Mode Mode Normal • This feature allows Brightness Picture MENU the user to adjust at Contrast his preference. Sound Color Tint Screen Sharpness Color Temp.
  • Page 57 Select the Effect Mode. MTS Function • Select [Effect] by pressing the “ CH ” buttons, then select ON/OFF by pressing the “ VOL ” button. • [Effect]: Used to emphasize stereo effect. If a channel is received in two MENU languages(dual Balance...

  • Page 58: Selecting Input Signal

    Selecting INPUT SIGNAL INPUT SIGNAL • Used to select INPUT signal of external device connected to the PDP. Press the INPUT SELECT Button. • Press the “TV/VIDEO” and “MULTIMEDIA” button on the TV/VIDEO Remote Control or the PDP Display to select desired input signal.
  • Page 59 • “TV/VIDEO button Video1 Video2 • “MULTIMEDIA button Component1 Component2 Component 1 1920 x 1080 NOTES: 1) If an external device is not connected or INPUT signal is not applied, Warning Message (“No Signal”) would be displayed. 2) In this case, check if external device is connected and/or terminal connection is properly done.

  • Page 60: Checking The Current Input Signal

    Checking the Current Input Signal Press the “DISPLAY” Button. Checking the Current Input Signal • Press the “DISPLAY” button on the Remote Control. DISPLAY • Used to check the INPUT signal mode, Component 1 resolution, 1920 x 1080 frequency(video only), etc. of the current screen.
  • Page 61 MENU Background, Language and Key pad Lock Settings Menu Background Press the MENU Button. and Language • The MENU screen will be displayed as below. Settings Mode Normal • Used to select Brightness Picture transparent of MENU Contrast MENU background Sound Color Tint...
  • Page 62 MENU Background, Language and Key pad Lock Settings Select LANGUAGE by using the “ CH ” Button. • Select LANGUAGE by using the “ CH ” button. • Every press of the button while you are in the “ VOL ” [LANGUAGE] mode would cycle through the different languages.

  • Page 63: Mgdi (Meta Genuine Digital Image)

    MGDI (Meta Genuine Digital Image) MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid, and delicated images. Press the MENU Button. MGDI • The MENU screen will be displayed as below. Demo Mode Normal • When [MGDI] is set to Brightness Picture Demo mode, Half of...
  • Page 64 Auto Power Setting Auto Power Setting POWER/STANDBY ” button • Select the [Auto Power] by pressing the “ Indicator from [Features]. • You can select [Auto Power] ON and OFF mode by using Front panel LED lights the “ VOL ” button. MENU •...

  • Page 65: Closed Caption Setting

    Closed Caption Setting Closed Caption Setting • Press the “CAPTION” button on the Remote Control. • Whenever pressing the “CAPTION” button, caption mode is changed as follow. CAPTION Text4 Text3 Text2 Text1 POWER VIDEO/ CATV DISPLAY TV/VIDEO MULTIMEDIA O ff MENU Closed Caption Setting in the Menu.
  • Page 66 Closed Caption Setting Select Features Caption Box Setting • Select [Features] by pressing the “ ” button. Background Opaque • Black : Background of Language English Picture the caption box is MENU Keypad Lock black. MGDI Sound Auto Power • Transparent : Closed Caption Background of the Screen...

  • Page 67: Time Setting

    Time Setting Press the MENU Button. • The MENU screen will be displayed as below. Mode Normal Brightness Picture MENU Contrast Sound Color Tint Screen Sharpness Color Temp. Normal Features POWER Channel VIDEO/ CATV Move Select Exit MENU Select Features •...
  • Page 68 Time Setting Off Time and Wake Time settings. Clock(current time) Setting • Select Functions by pressing the “ ” button. First, set [Clock]- current time, and then You can setup off-time and wake time. • The “Current time” • [Clock] : Enter clock setting menu by pressing the must be set up ahead MENU of setting up other time...

  • Page 69: Image Sticking Minimization(Ism)

    Image Sticking Minimization(ISM) Press the MENU Button. • The MENU screen will be displayed as below. Mode Normal Brightness Picture Contrast MENU • Image sticking Sound Color minimization. Tint • Displaying a still Screen Sharpness image like PC input Color Temp. Normal Features for a long time...

  • Page 70: Image Sticking

    Image Sticking Minimization(ISM) Select Functions. • Every press of the button after select function “ VOL ” by the “ ” button would switch between ON/OFF. MENU Pixel Shift Picture Low Bright Sound POWER Screen VIDEO/ CATV Features Channel Move Adjust Exit MENU...

  • Page 71: Parental Lock Setting

    Parental Lock Setting Press the MENU Button. Parental Lock • The MENU screen will be displayed as below. Mode Normal • When “Parental Brightness Picture Lock” is on, the MENU Contrast locked channels are Sound Color not available on the Tint Screen screen.
  • Page 72 Parental Lock Setting Press “Password”. New Password setting • Press Password by using number 0~9. New Password setting Caution) If using your Eenter Password menu is displayed at password, remember it. first use. It is needed Set New Password for for continuous using Parental Lock Exit...
  • Page 73 • Rating of movie is setup Parental Control even in movie, videotape Parental Lock Picture and other media objects TV GuidLines including TV program. Movie Retings Sound MENU No Ratings Unblock Ext. Sources Block Screen Change Password Features POWER Channel VIDEO/ Move Select...
  • Page 74 Parental Lock Setting “Change Password”. • In the initial purchase of TV set, password is set to blank. In continuous use of Parental Control, you need to change your password. • If pressing the “ VOL ” button after MENU selecting password, the second screen of below drawing appears.

  • Page 75: Initialize Setting

    Initialize Setting Press the MENU Button. Back to Initialization • The MENU screen will be displayed as below. Mode Normal • You can restore the Brightness Picture values of the MENU Contrast adjustment setting Sound Color made in the MENU Tint Screen to factory settings.
  • Page 76 Initialize Setting INITIALIZATION • Enter the sub menu by using the “ VOL ” button. • Select the [Initialize] by pressing the “ ” button, then press the “ VOL ” button. • A confirmation message will be displayed. MENU •...

  • Page 77: Setting Sleep Timer

    Setting Sleep Timer Press the “SLEEP” Button. Setting • Press the “SLEEP” button on the Remote Control. Sleep Timer • Pressing the “SLEEP” button first time will display the SLEEP current setting for SLEEP TIMER. • SLEEP TIMER turns • To cancel the SLEEP TIMER, press the “SLEEP” button the PDP off after a to select ‘OFF’.

  • Page 78: Before Requesting Service

    Before Requesting Service Before requesting for service, check the following points once again. • Remote control does not • The Display makes a snapping • There are empty spots at the top function properly. sound. and the bottom area of the screen. •...

  • Page 79: Specifications

    In the event that the product has been submerged in the water in rainy season: Immediately wash it with clean water, and dry it in a shadow place, then call for service from the nearest Daewoo Service Center. Never plug the Power Cord since there is risk of electric shock and SPECIFICATIONS damage of the product.
  • Page 80 48586200E10F-R1...

This manual is also suitable for:

Dts-42

Table of Contents