Review - Cornelius I-SERIES Training Manual

I-Series Ice Machine Training Manual
DATE: _______________________________________________
NAME: _______________________________________________
LOCATION: __________________________________________
General Ice Maker Installation
The following questions summarize important points in this training lesson
1. What is the minimum and maximum ambient temperatures for a ice maker installation.
___A. 25° F to 60° F
___B. 50° F to 100° F
___C. 72° F ±10° F
___D. Ice machines can be successfully installed in any ambient.
2. Inlet water pressures
___A. Are not important since the float can accomodate any municipal water pressure.
___B. Should not exceed 50 PSI.
___C. Can be maintained with a water pressure regulator.
___D. B and C.
3. Sealing the ice maker head to the ice bin or dispenser with approved sealant is
___A. Necessary only in areas subject to high humidity.
___B. The approved method od sealing the ice machine to the bin or dispenser.
___C. Required to meet sanitation codes.
___D. To eliminate leaks.
___E. C and D.
4. Proper air circulation is provided with a minimum clearance of
___A. 6 inches minimum
___B. 9 inches minimum
___C. 2.5 inches minimum
- 30 -

REVIEW

© 2001, IMI Cornelius Inc.