Learning The Buttons And Lights; Using The Camera Mount - Uniden UWS1100 Owner's Manual

Learning the Buttons and Lights

Button What it does
Turn the camera on. Press and hold to turn it off.
POWER
Enter pairing mode.
LInk
Light State
Power Status
light
Flashing The camera is in pairing mode.
Link Status
Orange
light
Green
Battery
Status light

Using the Camera Mount

The camera has a built-in stand so you can place it on any flat surface. If you
want to place your camera on a wall or a ceiling (or even if you just want to
secure it to a flat surface), you can use the included camera mount. (You might
want to bring the receiver along when you mount the camera; it's much easier
to get the camera into the right position when you have the display handy.)
6
What it means
On The camera is on.
Off The camera is off.
The camera is connected to the receiver.
Off The camera is in standby.
The battery is charging.
Red The battery is low; the camera will turn off in 3 minutes.
Off The battery is fully charged.