3.3.12 Registration Roller
(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.3).
(3) Remove the face up stacker assy (see 3.3.7).
(4) Remove the lower base unit (see 3.3.4).
(5) Remove the motor assy (see 3.3.9).
(6) With the lower base unit standing on its side, remove the one-way clutch gear 1.
(7) Remove the Registration Gear by unloking the latch of the Gear 4.
(8) Remove the Registration BearingL3.
(9) Press the registration roller Assy 2 in the direction of arrow
remove the registration roller 2 and the bearing (registration) 3.
(10) Pull out the registration roller Assy 2 in the direction of arrow
(11) Remove the pressure roller Assy gear 5 by unloking the latch of the gear 5.
(12) Remove the bearing-RegistrationL 6 and bearing RegistrationR 7.
(13) Remove the Spring 8 from the bearing 6,7.
5
6
3
4
41356801TH Rev.1
2
8
2
and lift up the left side of it, then
A
.
B
1
8
7
B
A
View A
View A
60 /