Year Limited Warranty Against Corrosion Failure - Mercury Ski User Manual

CA457
(Applicable In The United States,
Canada And Australia)
We warrant parts and assemblies of each 1988 and newer production MerCruiser (Product) sold with a one
I.
year limited Product warranty or the Bravo and TRS Drive Units on performance Products that have a 90
day limited warranty rendered inoperative as a direct result of corrosion, provided the following simple
precautionary steps which are specified in Owner's Manuals have been taken:
1.Specified maintenance procedures (such as replacement of sacrificial anodes, specified lubrication and
touch-up of nicks and scratches) have been implemented on a timely basis.
2.Recommended corrosion prevention devices have been employed (details below).
This warranty shall become effective upon receipt of a completed standard Product warranty registration
II.
card and shall remain effective for a period of three years from the date of purchase.
This warranty does not cover: (1) electrical system corrosion; (2) corrosion resulting from damage, abuse
III.
or improper service; (3) corrosion to accessories, instruments, steering systems; (4) damage due to marine
growth; (5) Product sold with less than a one year limited Product warranty except for Bravo and TRS Drive
Units; nor (6) Product used in commercial application.
ALL INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM THIS WARRANTY.
IV.
WARRANTIES OF MERCHANTABILITY AND FITNESS ARE EXCLUDED FROM THIS WARRANTY.
IMPLIED WARRANTIES ARE LIMITED TO THE LIFE OF THIS WARRANTY. SOME STATES (OR
COUNTRIES) DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other legal rights which vary from state
V.
to state (or country to country).
Other details of this warranty are contained in paragraphs IV, V and VI of the (United States and Canada)
VI.
Product Warranty, and paragraphs III, IV, V and VI of the (International) Product Warranty, contained in this
manual, which paragraphs are incorporated herein by reference.
Mercury Marine products are built using the most advanced corrosion protection process available. This
manufacturing system, complemented by dealer and customer participation in an anti-corrosion preventive
maintenance program, provides protection against repair costs incurred by the effects of marine corrosion.
OWNER'S RESPONSIBILITY
Protection against certain types of corrosion damage must be provided by using such systems as the Quicksilver
MerCathode System and/or Galvanic Isolator. These certain types of corrosion damage are: damage due to
stray electrical currents (on-shore power connections, nearby boats, submerged metal), or improper application
of copper base anti-fouling paint.
If anti-fouling protection is required, Tri-Butyl-Tin-Adipate (TBTA) base anti-fouling paints are recommended on
MerCruiser boating applications. In areas where Tri-Butyl-Tin-Adipate base paints are prohibited by law, copper
base paints can be used on the boat hull and transom. Do not apply paint to the MerCruiser drive unit or transom
assembly. In addition, care must be taken to avoid an electrical interconnection between the MerCruiser Product
and the paint. Corrosion damage that results from the improper application of copper base paint will not be
covered by this limited warranty.
TRANSFER OF WARRANTY
This Limited Warranty is transferable to subsequent purchasers for the remainder of the unused portion of the
3-year limited corrosion warranty.
3 Year Limited Warranty Against
Corrosion Failure
57