Basic Settings; Setting The Language; Setting The Unit; Setting The Wheel Size 1 And 2 - Sigma ROX 5.0 User Manual

Basic settings

setting the language

Reset
Mode 2
Set Mode 1
Reset
Mode 2
Set Mode 1
Reset
Mode 2
Set Mode 1
Reset
Mode 2
Set Mode 1
www.sigmasport.com
4 Basic settings
Press and hold the
Set
display. the preset language then appears.
If you are using the roX 5.0 for the first time and awakening it from deep sleep
mode, it will automatically jump to setting mode without you pressing and holding
the button.
Set
Caution
the roX 5.0 can also be set during a ride. not advised and please do so with
caution!
4.1 Setting the language
1 Press the button to switch to the preset language.
Mode 1
2 Press the button. the display flashes.
Set
3 Press or
Mode 2 Reset
4 Press the button to save your setting.
Set
'set oK' appears on the display.
4.2 Setting the unit of measure
1 Press the button to switch to the preset unit.
Mode 1
2 Press the button. the display flashes.
Set
3 Press or
Mode 2 Reset
4 Press the button to save your setting.
Set
'set oK' appears on the display.

4.3 Setting the wheel size 1 and 2

1 Press the button to switch to the preset wheel size
Mode 1
1 or wheel size 2.
2 Press the button. the first two digits for entry flash.
Set
3 Press or
Mode 2 Reset
4 Press the button to switch to the next digit.
Mode 1
5 Press the button to save your setting.
Set
'set oK' appears on the display.
roX 5.0
button for three seconds. 'setting oPen' flashes on the
to select the desired language.
to switch between km/h and mph.
to increase or decrease the value respectively.
roX 5.0
Page 16