Clear Channels From Memory; Menus; Select Display Mode (Day/Night); Select Backlight Color - Uniden Bearcat 980 SSB Owner's Manual

Clear Channels from Memory

1. In MEM mode, select a channel.
2. Press and hold MEM/SCAN until CLEAR displays.
3. Release MEM/SCAN. The radio plays the next channel in memory.

MENUS

Access menus by pressing MENU/OK. The first menu selection is Day
or Night setting. Turn the Channel Selector knob to change the Day or
Night setting.
Press MENU/OK again for:
ƒ Day/Night - display intensity
ƒ COLOR - Backlight color
ƒ CONT - LCD Contrast
ƒ BRIGHT - Brightness
ƒ WXSCAN - Weather Scan mode
ƒ DIAG - Diagnostics
– Battery Check
– Antenna Mismatch Check
– RF Power Check
ƒ Exit

Select Display Mode (Day/Night)

1. Press MENU/OK to access Day or Night selection.
2. Select Day or Night mode setting.
3. Press MENU/OK to activate your selection.

Select Backlight Color

1. Press MENU/OK to select Day or Night setting and then press
MENU/OK again to activate your selection.
2. Press MENU/OK to activate the menus. Turn Channel Selector
until COLOR displays.
3. Press MENU/OK. Turn Channel Selector until DAY displays.
4. Press MENU/OK. DAY blinks.
5. Turn Channel Selector to cycle through the available backlight
colors or off (none). The selection number for that color displays
E-14