Uniden Bearcat 980 SSB Owner's Manual page 8

11. MEM/SCAN: Press to start or stop scanning modes [All Channel
Scan (see page 12) and Memory Scan (see page 12)]. Press and hold
to set or clear channel memory while in Memory mode.
12. 9/19/NORM: Press to switch between emergency channel 9,
channel 19, and standard CB channels.
13. Frequency Display: Displays the MHz of the selected channel. Also
displays menu options.
14. ANL/NB: Provides 3-way control of ANL (Automatic Noise
Limiter) or NB (Noise Blanker) features — ANL on, NB on, or both
ANL and NB on or off. ANL reduces external noise. NB reduces
interference from vehicle ignition systems. Press and hold for one
second to turn key beep tone on and off.
Use this button to turn key beep on and off. Press and hold until
or
AM/USB/LSB: Three-way switch to select AM, USB or LSB
operation.
15. Clarifier: 1.5 kHz. Adjust Receive Frequency without changing the
transmitter frequency (Fine and Course adjustment).
16. Antenna socket: Connects antenna to the unit.
17. PA SP: Connects optional external 8-ohm, 4-watt speaker for use
as a public address system.
To prevent acoustic feedback, separate the microphone from the speaker
when operating the PA at high output levels.
18. EXT. SP: Connects 8Ω 4W speaker to remotely monitor receiver.
BP OFF
displays.
17 18
21
19
22
20
E-8
BP ON