Table of Contents
Advertisement
Setup
Mounting
Orientation
Rigging
Procedure The STRIKE™ 324 comes with a double-yoke bracket to which you can either attach
Mounting Diagram
-8-
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
The STRIKE™ 324 consists of a double-yoke bracket and the body of the product
Chauvet recommends using the following general guidelines when mounting this
product.
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the
Safety
Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product's weight. See the
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable.
mounting clamps for hanging or simply use as a floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this
product. Use at least one mounting point per product.
Floor Mounting
Safety
Technical Specifications
Mounting Clamp
(such as CLP-15 or
CLP-15N from Chauvet)
Safety Cable
(such as CH-05
from Chauvet)
Overhead Mounting
Notes.
for the weight-bearing
STRIKE™ 324 User Manual Rev. 3
Advertisement
Table of Contents
