Operating Instructions - Kobalt 382461 Assembly And Operating Manual

OPERATING INSTRUCTIONS

1. Attaching the Battery Pack (sold separately)
NOTE: This 18 V Impact Driver is compatible with
Kobalt Compact Lithium-ion Battery (0352546), Kobalt
Extended Run Lithium-ion Battery (0352548) and
Kobalt 18V NiCd Battery (0005667).
a. Place the direction-of-rotation selector (D) in the
center (locked) position.
b. Align the raised portion on the battery pack with
the grooves on the bottom of the impact driver,
then slide the battery pack onto the impact driver
as shown.
c. Ensure that the battery-release button on the
battery pack snaps into place and the battery
pack is secured to the impact driver before
beginning operation.
NOTE: When placing the battery pack on the tool, be
sure that the raised rib on the battery pack aligns with
the groove on the impact driver and the latches snap
into place properly. Improper assembly of the battery
pack can cause damage to internal components.
2. Detaching the Battery Pack (sold separately)
a. Place the direction-of-rotation selector (D) in the
center (locked) position.
b. Press the battery-release button to release the
battery pack.
c. Pull forward on the battery pack to remove it from
the impact driver.
WARNING: Battery tools are always in operating
condition. Therefore, the direction-of-rotation selector
should always be locked (center) when the tool is not
in use or when carrying the tool at your side.
1
Battery Pack
Release Button
2
Battery Pack
Release Button
8
D
D