UTStarcom F3000 Getting Started page 94

Menu -> WiFi
RTP Port
This option enables you to set the RTP port.
After accessing this option, key in the RTP port number (10000~20000),
and press the left soft key
The port number should range from 10000 to 20000; otherwise Failed
will be displayed
4.7.4.3 NAT
Menu WiFi Signal Protocol NAT
Select this option to set the NAT protocol.
After you access this option, the STUN Mode option will be displayed:
STUN Mode
This option enables you to set the STUN protocol:
Server Name
Select this option to set the STUN server name.
After accessing this option, key in the STUN server name, and press the
left soft key
Server Port
Select this option to set the STUN server port.
After accessing this option, key in the STUN server port number, and
press the left soft key
On/Off
Select Disable or Enable to deactivate or activate the STUN function.
90
(Ok) to complete the operation.
(Ok) to complete the operation.
(Ok) to complete the operation.