Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UTStarcom F3000
Summary of Contents for UTStarcom F3000
- Page 2 Page III. How do I... How do I... Page IV. These operations need to be performed in standby mode. When Turn Vibration Press and hold until the (green) the left soft key function is Menu, the phone is in standby mode. on/off indicator appears/disappears.
-
Page 4: Charge The Battery
Internet telephone service, with mobility. This guide covers how to configure and use your F3000 and the phone will be switched off automatically. To charge the to make VoIP phone calls via the service network. -
Page 5: Connecting To A Wireless Network
If your home wireless router was installed with a WEP or WPA-PSK (Pre-Shared Key), use it when when the F3000 has successfully connected to an AP, it will need to be provisioned. Please refer to Section 4. defining the SSID to your F3000. If you are defining a... -
Page 6: Finding And Saving The Access Point
1. There are two ways to initiate Net Search: will see the message "Registering via APname". When the - Press (Search) while the F3000 is automatically right soft key function displaying Names in standby mode, scanning for an AP (when the phone is first turned on). -
Page 7: Entering Ssids Directly
Internet successfully via indicates Alpha entry; the Access Point, the F3000 will need to be provisioned with the latest configuration and software. This process is automatic and indicates numeric entry. -
Page 8: Troubleshooting
These are the most common problems and solutions that come The phone cannot be switched on: up when starting to use the F3000 WiFi phone. If you are having - Press and make sure you hold it down for more than 2 trouble placing a phone call, go through this checklist until your seconds.
Need help?
Do you have a question about the F3000 and is the answer not in the manual?
Questions and answers