Pinyin And Stroke; Digit - UTStarcom F3000 Getting Started

Input Method
For example: if you press
appear in turn:
- The letter just entered will be underlined. When the letter is
underlined, press
press the right soft key
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter share
the same key, press the left soft key
underline, and then enter the next letter; or simply wait for one second
to input again. Press
a space.
3. When no letter is underlined, press
to move the cursor; press the right soft key
character to the left of the cursor; press and hold the right soft key
(Clear) to delete all characters; press

5.4 PinYin and Stroke

These two input methods are only used for inputting Chinese characters.

5.5 Digit

Switch to digit input method;
corner of the screen.
To enter digits, press the corresponding number keys
to switch input methods.
100
repeatedly, the following letters
to switch between upper and lower cases;
(Clear) to delete the letter
to confirm the current letter input and enter
to enter a space; press
will be displayed in the upper right
or to remove the
(Clear) to delete the
to switch input methods.
~ . Press