Charge The Battery - UTStarcom F3000 Getting Started

5. (blue) Means the Ring Mode is set to Vibration; if the Ring Mode
is set to Vibration And Ring or Ring After Vibration,
displayed; if the Ring Mode is set to Mute,
No Disturb function is active,
If you press and hold the vibration shortcut key
(green) will be displayed
6. Indicates there are unread voice mails.
7. Indicates there are unread new emails.
8. Indicates the battery charge level. The higher the bar, the greater
the battery power.
9. Content Display Area: Shows phone numbers, characters, etc.
10. Soft key function display area: Shows the functions of the left soft key
and the right soft key

1.5 Charge the Battery

When the battery power is low and needs recharging, the battery indicator
will flash continuously, and the phone will sound a low battery alarm
(if the Alert Tone is set to On and the Ring Mode is set to neither
Vibration nor Mute), reminding you that the battery is running low and the
phone will be switched off automatically. To charge the battery, follow the
steps below:
1. Connect the charger to an AC wall outlet (100~240V).
2. Connect the lead from the charger to the charging socket of the phone.
The battery indicator bar starts to scroll (
will be displayed.
High
.
Getting Started
will be displayed. If the
in standby mode,
Low
will be
).
13