Calendar - UTStarcom F3000 Getting Started

4.5.2 Calendar

Menu Tools Calendar
This function enables you to view the calendar and set up to 10 memos.
In standby mode, if the memo time expires, the memo details will be
displayed; the memo alert will sound (if the memo alert tone is activated).
Press any key to return to standby mode.
After you access this option, the calendar will be displayed with the
current date highlighted. The dates marked red indicates there are
memos specified for these days.
You can press
(Option); the following options will be available:
4.5.2.1 Choose Date
When you access this option, you can enter a date from 1900-01-01 to
2099-12-31, and then press the left soft key
calendar with the specified date highlighted.
4.5.2.2 Edit Memo
Select this option to set a memo.
Note: If the memo memory is full, when you select this option,
Memo Full will be displayed.
Observe the following steps to set a memo:
1. Enter the memo contents (up to 32 alphanumeric characters or 16
Chinese characters), and then press the left soft key
Awake Time will be displayed. The default date is the selected date;
the default time is "08:00".
- The memo content cannot be empty; otherwise Empty will be
displayed when you press the left soft key
to select the desired date. Press the left soft key
Menu -> Tools
(Ok) to view the
(Ok).
(Ok)
75