UTStarcom F3000 Getting Started page 89

4.7.3.1 DHCP
Menu WiFi Network Parameter DHCP
If the DHCP function is active, the phone will obtain an IP address
automatically from the DHCP server.
After accessing this option, select Disable or Enable to disable or enable
DHCP.
4.7.3.2 IP
Menu WiFi Network Parameter IP
This option enables you to perform IP settings.
Note: Only when DHCP is disabled, can the IP option be available.
Otherwise, when you select this option, Please Disable DHCP will
be displayed.
IP Address
Select this option to set the phone's IP address.
After accessing this option, key in the IP address, and press the left soft
key (Ok) to complete the operation.
Subnet Mask
Select this option to set the subnet mask.
After accessing this option, key in the subnet mask, and press the left soft
key (Ok) to complete the operation.
Gateway IP Address
Select this option to set the gateway IP address.
After accessing this option, key in the gateway IP address, and press the
Menu -> WiFi
85