Lighting & Operation - Dickinson Sea-B-Que Operating And Installation Instruction Manual

Lighting
1) Sea-B-Que control regulator in LOCK-OFF position
2) Open Lid and turn on LPG gas supply at source
3) Turn Control Regulator ON to the medium level. Press Igniter button
several times, or use a long bbq lighter through the match hole. Check
to make sure the propane is burning.
**If the burner does not light immediately turn control regulator to
lock-off position and do not attempt to light the burner for at least 60
seconds.
Operation
When the burner is lit the Control Regulator setting may be selected. With
the lid closed the Sea-B-Que will quickly reach cooking temperatures
(approx. 5 minutes).
Do not leave the control regulator on high with the lid closed for long
periods of time or damage may be caused to the body of Sea-B-Que due to
overheating. High gas settings are only recommended for a short pre-heat
period, barbequing with the lid open, or with the lid closed, but at a
moderate setting. After cooking, turn the Sea-B-Que off at the LPG source.
Once the burner has extinguished, turn the Control Regulator to the LOCK-
OFF position. This will de-pressurize the fuel line.
8