Table of Contents
Advertisement
1.8 Installing the Motherboard
CAUTION
In order to remove or install the motherboard, remove the power module,
AC strip unit, Interface unit, PCI riser card unit and Cooling FAN unit beforehand.
Attach two CPU back-plates on the bottom side of motherboard.
CAUTION
Remove the paper covers from top sides of the heatsink back-plate before use.
Place the motherboard on the chassis standoffs so that each of the six mounting holes
fit over a standoff.
CAUTION
Check the insulator of motherboard on the chassis and then insert the front side of motherboard
into the chassis first. In placing the motherboard, check the ID LED's hole.
Secure the motherboard on the chassis with the screws.
Alignment for
the ID LED Hole
92
Advertisement
Table of Contents
