Table of Contents
Advertisement
1.8 Installing the Motherboard
CAUTION
In order to remove or install the motherboard, remove the power module, AC strip unit, Interface unit,
PCI riser card unit and Cooling FAN unit beforehand.
① Remove the power supply unit first.
② Place the motherboard on the chassis standoffs so that each of the six mounting holes fit over a
standoff.
③ Secure the motherboard on the chassis with the screws.
CAUTION
Routing SCSI cable should be prior to installing Interface unit.
CAUTION
Check the insulator of motherboard on the chassis and then insert the front side of motherboard
into the chassis first. In placing the motherboard, check the ID LED's hole.
Alignment for the ID LED
95
Advertisement
Table of Contents
