Table of Contents
Advertisement
Select "NVIDIA RAID CLASS DIRVER" and then press Enter
Press S again at the Specify Devices screen, then press Enter.
Select " NVIDIA nForce Storage Controller" and then press Enter.
The following Windows Setup screen appears listing both drivers:
Press Enter to continue with operating system Installation, Be sure to copy the files from
the floppy is complete, then take out the floppy.
Following the instructions on how to install operating system, During the GUI portion of
the installation you might be prompted to click Yes to install the RAID driver.
Click Yes as many times as needed in order to finish the installation.
This will not be an issue with a signed dirver.
NOTICE
Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed under
Windows once for that hard drive. After that, the driver will not have to be installed.
72
Advertisement
Table of Contents
