Table of Contents
Advertisement
1.6 Replacing the Interface Unit
1.6.1 Interface Board(IFB) Unit and Backplane Unit
Secure the backplane board on the backplane bracket with two screws
and the interface board on the interface bracket with three screws.
Assemble the interface board unit into the backplane board unit.
Install the interface unit into the chassis.
Install the cable for FDD, front LED panel and CD-ROM drive.
CAUTION
Before installing IFB, remove HDD carrier and locate FDD forward.
CD-ROM Cable
FDD Cable
LED Panel Cable
89
Advertisement
Table of Contents
