Inserting The Battery; Removing The Battery; Turning On And Off The Camera - Nikon COOLPIX 5630 User Manual

n===JI
_~
""=":/
~
=::f
~It-
§I
LITHIUM ION
"
BATTERY PACK
CD
EN-EL12
3.7V 1050rnAh
'-0~
()
Inserting the Battery
Removing the Battery
Turn the camera off and confirm that the power-on
lamp and the monitor are off before opening the
battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange battery
latch in the direction shown
CD.
The battery can then be
removed by hand
@.
•
~Iote
that the battery may become hot during use;
observe due caution when removing the battery.
Turning On and Off the Camera
Pres;s the power switch to turn on the camera. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
Press the power switch again to turn off the camera.
When the camera turns ofCboth the power-on lamp
and monitor will turn off.
• Vv'hen the camera is off, holding down the
[E]
button will turn the camera on in
playback mode (028).
~
Auto Power Off in Shooting Mode (Standby Mode)
If nc operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for another
three minutes, the camera will turn off automatically (the auto off function).
If the monitor is off in standby mode, press the power switch or the shutter-release button to
reactivate it.
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option ([IJ134) in the setup menu ([IJ121).
.,..,
.....
V>
....
Vl
....
(l)
"D
V>
17