Camera Issues; Attached Video Input Device Not Working - Avaya 1030 Installation Manual

Camera Issues

Video from the camera appears in a small window on the main screen of the user interface
above the REDIAL list. If no video from the camera appears, do the following:
• Ensure that the camera is properly connected to the Avaya codec as described in
"Installing Avaya 1030" on page 14.
• Verify that the blue LED on the front of the camera is lit and not blinking, indicating that
power is active.
• From the main screen of the user interface, press
access the System Menu. Press
page. Ensure that the status of the camera is Ready.
• Ensure that the primary input is set to the high definition camera. Press
remote control. If Primary Input : HD Camera does not appear at the top of the screen,
press to display the Primary Input selection dialog. Use the arrow keys on the
remote control to select the appropriate high definition camera and press OK.
Improving a Dim Image
If the image appears too dim, you can adjust the HD Camera Brightness preference in
User (or Administrator) Preferences : Diagnostics : High Definition Camera.

Attached Video Input Device Not Working

When you connect a video input device that has capabilities not supported by an Avaya
system, the status Out of range appears on the System Information page for that input.
The device may be in a mode that the codec does not support. Changing the mode may
help. Otherwise, the device is not supported.
23
on the Avaya remote control to
to access page 2 of the System Information
Avaya 1030 Installation Guide
on the