Balanced Input; Pa Output Relay Connection - Altair EF-200 Owner's Manual

2) Using single conductor shielded cable:

BALANCED INPUT:

PA OUTPUT RELAY CONNECTION

The PA output relay connection allows to carry out a control on an external application every
time the PA output is activated (connection with unidirectional transmission systems - radio
stations. Lights turn on/off, motors, etc.).
The multipurpose relay connection takes place with a JACK ¼" connector. The next list shows
the multipurpose relay PIN correspondence with the JACK ¼":
E-200 SERIES INTERCOM SYSTEM — EF-200 DUAL CHANNEL MASTER STATION
11