EP2C612D16FM / EP2C612D16FM-N
3.5 Server Mgmt
Wait For BMC
Wait For BMC response for specified time out. In PILOTII, BMC starts at the same time
when BIOS starts during AC power ON. It takes around 30 seconds to initialize Host to
B<C interfaces.
System Event Log
Press <Enter> to change the SEL event log configuration.
SEL Conponents
Change this to enable ro disable all features of System Event Logging during boot.
BMC Network Configuration
Press <Enter> to configure BMC Network parameters.
Configuration Address Source
Select to configure BMC network parameters statically or dynamically(by BIOS or BMC).
Configuration options: [Unspecified], [Static] or [Dynamic].
Unspecified: BMC network parameters are configured by BMC itself.
Static: Manually enter the IP Address, Subnet Mask and Gateway Address in the BIOS for
BMC LAN channel configuration.
75