ASROCK EP2C612D16FM User Manual page 37

mini SAS Connectors
(SATA0-3)
(see p.6 or p.9)
(sSATA0-3)
(see p.6 or p.9)
USB 2.0 Header
(9-pin USB_3_4)
(see p.6 or p.9)
USB 3.0 Connector
(USB3_5)
(see p.6 or p.9)
USB 3.0 Header
(19-pin USB3_2_3)
(see p.6 or p.9)
IntA_PB_SSTX+
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
Chassis Speaker Header
(4-pin SPEAKER1)
(see p.6 or p.9)
DUMMY
GND GND
P+6
P+7
P-6
P-7
USB_PWR USB_PWR
1
1
Dummy
IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
GND
IntA_PB_D-
GND
IntA_PA_SSTX+
IntA_PA_SSTX-
GND
GND IntA_PA_SSRX+
IntA_PA_SSRX-
bus
V Vbus
DUMMY SPEAKER
1
+5V DUMMY
EP2C612D16FM / EP2C612D16FM-N
These connectors are used to
connect the SATA port on the
backplane.
B e side s t wo USB 2 .0 p or t s
on the I/O panel, there is one
header on this motherboard.
E a c h U S B 2 . 0 h e a d e r c a n
support two ports.
Besides two default USB 3.0
ports on the I/O panel, there
is one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB
3.0 ports.
Please connect the chassis
speaker to this header.
31