Mounting The Camera - JVC LST0984-001A Instructions Manual

Mounting the Camera

When mounting the camera on a fixer, pan/tilt and the like, use the camera-
mounting screw hole located on the camera-mounting bracket. (Length of screw: 7
mm or less)
Camera-mounting
screw hole
Rotation-preventive
hole
.
Use a camera-mounting screw with a length shorter than 7 mm from the
Note
camera-mounting face. Use camera-mounting bracket fastening screws
with length shorter than 6 mm. Do not use a screw that is longer than the
specified length. It may damage the internal parts.
Mounting the Camera-Mounting Bracket on Top of the Camera
The camera-mounting bracket is originally mounted at the bottom of the camera
before shipment but it can also be mounted on top of the camera.
1 Remove the camera-mounting bracket fastening screws (x2).
The camera-mounting bracket is removed from the camera.
2 Mount the camera-mounting bracket on top of the camera.
3 Mount the camera onto a fixer, pan/tilt unit and the like.
1
Camera-mounting
bracket fastening
screws
.
Camera-mounting bracket fastening
screws (x2: M2.6 x 6 mm)
Camera-mounting bracket
Camera-mounting
bracket
3
POWER
Connection/Installation
IRIS
MAX.
7
mm
2
9