JVC LST0984-001A Instructions Manual page 10

Connection/Installation
Mounting the Camera (Continued)
Fall Prevention
Special attention is required when installing the camera to the wall or ceiling.
You should not engage in the installation work yourself. Ask a professional to do
the job, because injuries and accidents may occur if the camera falls.
When installing the camera on a fixer, pan/tilt unit and the like, make sure to
install it firmly using a rotation-preventive hole to prevent fall.
To prevent fall, connect the camera to a section with sufficient strength (ceiling
slab or channel) using a fall prevention wire.
Pay attention to the length, strength, routing and material (insulation properties)
of the fall prevention wire used.
Use the screw (M3 x 6 mm) on the back of the camera for the installation of the
fall prevention wire. Do not use a screw that is longer than 6 mm as it may
damage the internal parts.
6mm
.
When mounting the camera to the ceiling, ensure to wear safety glasses
Note
to protect the eye from any falling objects.
10
D/ N AU TO
F
BL C OF
LC D
F
AE S OF
R TY PE
MO NI TO
2 ON LY
CL AS S
)
(U TY PE
ER
ED PO W
IS OL AT )
(E TY PE
ON LY
6 mm
1
2 mm
.
RU CT IO N
SE E IN ST
L
M AN UA
OF F
V ID E O
ON
O U T
CR T
ON
FO CU S
AD JU ST
S E T
GN D
AU X
M E N U
DC 12 V
AC 24 V
2
Fall Prevention Wire
M3 x 6 mm