Connections; Basic Systems; Mounting The Optional Lens (T14 X 5.5Md) To The Camera Head - JVC KY-F58 Instruction

3. CONNECTIONS

BASIC SYSTEMS

Mounting the optional lens (T14 X 5.5MD) to the camera head

(See page 9.)
Lens
(T14 x 5.5 MD)
How to mount the camera head
(See page 10.)
[LENS REMOTE]
Recommended Remote Controllers
• TCR-201F (CANON) for positioning control
Note:
When using an extension cable, the screen
flickers slightly during the focusing operation..
• RMD-10 (FUJINON) for speed control
MOUNTING THE OPTIONAL LENS (T14 X 5.5MD) TO THE CAMERA HEAD
Camera head
Screws
Mount fastening ring
Lens
Note:
The KY-F58 is not equipped with a lens.
When a lens other than the T14x5.5MD
of the 3-CCD C-mount lens is used, it may
cause the KY-F58 to malfunction. When
such a lens is used, the lens' height
should not be more than 4 mm above the
lens mount surface.
male
Camera head
female
To CCU
KY-F58
COLOR VIDEO CAMERA
To LENS
Provided cable
(5m)
3.
2.
4mm or less
Lens
Connecting the camera
head and CCU
(See page 10.)
MENU
PULL OPEN
TO CAMERA WHITE PAINT
male
SET
R
PAINT
To CAMERA
CCU (Camera Control Unit)
female
1.
Remove the lens mount cap for the camera.
Be careful no dust gets into the mounting hole when you
remove it.
2.
Attach the screw of the camera head mount section to that
of the lens mount section. Turn the mount fastening ring
slowly clockwise and fix the lens to the camera head by
screwing it firmly.
To change the attitude angle of the lens rotating direction.
1
Turn the mount fastening ring counter-clockwise from the
lens side.
2
Turn the lens slowly to adjust the attitude angle, and fas-
ten it again firmly with the mount fastening ring.
3.
Plug in the lens cable to the LENS connector of the camera
head and fasten it firmly.
For more details, refer to the Instructions for the Lens.
Monitor
OUTPUT
CAMERA CONTROL UNIT KY-F58
LENS REMOTE terminal
FILES FREEZE
1 2 3 4
on the rear panel
SELECT MEMORY
POWER
VIDEO LEVEL
FULL AUTO LEVEL
ON
B
OFF
• The LENS remote controller
should be connected to the
REMOTE terminal on the rear
panel of the CCU or to LENS
REMOTE on the lens.
LENS remote control
9