Necessary Settings Before Use; Power Related Preparations (Using The Battery Pack); Press - JVC GZ-MG77EK Instructions Manual

Jvc hard disk camcorder instructions
Hide thumbs Also See for GZ-MG77EK:
Table of Contents

Advertisement

Necessary Settings before Use

14
EN
Be sure to configure the following three settings
before use.
Power Related Preparations
(Using the Battery Pack)
1
Set the power switch to OFF.
Slide while pressing down the lock button.
Lock button
2
Attach the battery pack.
Slide the battery pack down until it locks in
place.
Bottom of the Camera
Controls in this section
Power Switch
INDEX
Power off
Playback
Recording
BATT.
Power/Charge Lamp
MENU
/
/
/
/ 49
3
Charge the battery pack by
connecting to the AC adapter.
Open the cover.
AC Adapter
The power/charge lamp blinks to indicate
charging has started.
When the lamp goes out, charging is
finished. Unplug the power cord from the
AC outlet and disconnect the AC adapter
from the camera.
To detach the battery pack
Slide and hold BATT. (
the battery pack.
To check the remaining battery power
(
pg. 16)
Required charging / recording time
Battery pack
Charging time
BN-VF707U
1 hr. 30 min.
(Provided)
BN-VF714U
2 hr. 40 min.
BN-VF733U
5 hr. 40 min.
The times shown above are approximate times.
NOTE:
You can also use the camera with just the AC
adapter.
DC
Connector
To AC Outlet
(110V to 240V)
Power Cord
step 2), then remove
Recording
time
1 hr.
2 hr. 5 min.
4 hr. 55 min.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gz-mg77e

Table of Contents