JVC GZ-MG77EK Instructions Manual page 25

Jvc hard disk camcorder instructions
Hide thumbs Also See for GZ-MG77EK:
Table of Contents

Advertisement

MSET Menu
Menus
AE
(Manual Exposure)
Adjusts the brightness.
AF
(Manual Focus)
Adjusts the focus.
WB
(White Balance)
Adjusts the white
balance to achieve the
optimum colours for the
amount of light in your
surroundings during
recording.
Settings ([ ] = Factory-preset)
For video recording
[AUTO]: The brightness is adjusted automatically.
–6 to +6: Corrects the brightness within this range in increments of 1.
Use
/
to set the value.
For still image recording
[±0]: The brightness is not adjusted.
–2.0 to +2.0 (EV): Corrects the brightness within this range in
increments of 1/3EV. Use
To lock the exposure
When the menu disappears after you finish configuring the setting,
press and hold 49 for more than 2 seconds. The
[AUTO]: The focus is adjusted automatically.
: Adjusts the focus manually. Use
(When zooming, the subject will not go out of focus if you adjust the
focus at the telephoto (T) side before zooming to the wide-angle (W)
side.)
[AUTO]: White balance is adjusted automatically.
MWB: Adjusts the white balance manually depending on the light
source.
1) Hold a sheet of plain white paper
in front of the subject. Adjust the
zoom, or position yourself so that
the white paper fills the screen.
2) Press and hold 49 until the
indicator starts blinking then
stops blinking.
FINE: When shooting outdoors on a sunny day.
CLOUD: When shooting outdoors on a cloudy day.
HALOGEN: When a video light or similar type of lighting is used.
/
to set the value.
/
to set the focus.
CONTINUED ON NEXT PAGE
25
EN
indicator appears.
White paper

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gz-mg77e

Table of Contents