When Using An Sd Card - JVC GZ-MG77EK Instructions Manual

When Using an SD Card

By default, the HDD is set as the recording
medium. If you want to record to an SD card,
the following three operations need to be
performed.
NOTE:
For details on compatible SD cards, see "Check
the compatibility of recording media" (
Insert an SD card
Insert and remove the SD card only while the
power is turned off. Otherwise, data on the card
may be corrupted.
1
Open the SD card cover
Bottom of the
Camera
2
Firmly insert the card with its clipped
edge first.
Clipped Edge
Do not touch the terminal on the reverse
side of the label.
3
Close the SD card cover.
\
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
Preparation:
pg. 3).
.
To change the recording medium back to
the HDD
Select [HDD] in step 4.
This will also ensure stable speeds and
operation when accessing the SD card.
For details on how to format an SD card, see
"Formatting a Recording Medium" (
Change the recording medium
Set the power switch to
1
2
Select [REC MEDIA SETTING].
Select
Set
3
Select [VIDEO MODE] or [IMAGE
MODE].
Select
Set
4
Select [SD].
Select
Set
5
Format an SD card when using it for
the first time
17
EN
or .
DIS
CAMERA SETTING
BASIC SETTING
REC MEDIA SETTING
DATE/DISPLAY
REGISTER EVENT
QUALITY
COPY/MOVE
NO. RESET
0 0
VIDEO MODE
IMAGE MODE
FORMAT
CLEAN UP
SD
HDD
pg. 41).