Protecting Files From Accidental Erasure; Press - JVC GZ-MG77EK Instructions Manual

40
Managing Files (Continued)
EN

Protecting Files from Accidental Erasure

Preparation:
Set the power switch to
Select the file type (video or still image) using
the MODE switch.
1
2
Select [PROTECT].
Select
Set
3
Select the desired menu.
Select
Set
[CURRENT]:
Currently displayed file is protected.You can
select the previous or next file by pressing
/ .
[FILE SELECT]:
You can choose multiple files to protect from
index screen.

1) Press

want to protect, then press 49.
• The
select other files, repeat this step.
• If you slide the zoom lever towards T, the
preview screen is displayed. Sliding the
zoom lever towards W returns to the
index screen.
2) Press MENU.
[PROTECT ALL]:
All files are protected.
.
PLAYLIST
WIPE/FADER
EFFECT
PROTECT
DELETE
BASIC SETTING
REC MEDIA SETTING
CANCEL ALL
CURRENT
FILE SELECT
PROTECT ALL
/ / / to select the file you
mark appears on the file. To
PROTECT?
EXECUTE
CANCEL
4
Select [EXECUTE].
If [FILE SELECT] was selected in step 3,
select [QUIT].
Select
Set
To release protection
Select the protected file in step
To release protection of all files
1) In step 3, select [CANCEL ALL], then press
49.
2) Press / to select [EXECUTE], then
press 49.
NOTE:
For an SD card, you can use the write/erase
protection tab to set protection. To protect all the
files, slide the tab to the "LOCK" position.
Write/erase protection tab
3
.