HP OmniBook 900 Service Manual page 71

Power Menu
If ACPI is activated in Windows 98, ACPI settings override settings in this menu.
Power Management Mode
Smart CPU Mode
Standby Time-out
Suspend Time-out
Hibernate Time-out
Hard Disk Time-out
Time-out on AC
Power Button Mode
Lid Switch Mode
Resume on Serial Ring
Resume on Time of Day
Resume Time
Auto Suspend on Undock
Auto Turn-on on Dock
Boot Menu
Diskette Drive
Hard Drive
CD-ROM/DVD Drive
Exit Menu
Save Changes and Exit
Discard Changes and Exit
Get Default Values
Load Previous Values
Save Changes
HP OmniBook 900
Disables time-outs, selects a combination of time-outs, or
allows customized time-outs.
Enables automatic CPU power savings. Absence of keyboard,
mouse, and hard disk activity could cause slower CPU
response. This should normally be Off.
Sets the period of inactivity after which the computer goes
from On to Standby power mode.
Sets the period of inactivity after which the computer goes
from Standby to Suspend power mode. (Skips Standby mode
if that time-out is disabled.)
Sets whether the computer goes from Suspend to Hibernate
power mode after the indicated period of inactivity. (Skips
Suspend mode if that time-out is disabled.)
Sets the period of hard disk inactivity after which the hard disk
stops spinning. Also affects a hard disk drive in the plug-in
module bay.
Sets whether power management time-outs occur while the ac
adapter is connected.
Sets the action of the blue power button when pressed for less
than 4 seconds.
Sets the action when the OmniBook lid closes.
Sets whether the system resumes from Suspend if a ring
signal is received.
Sets whether the system resumes from Suspend at a defined
time of day.
Sets the 24-hour time when the system resumes from
Suspend if enabled.
Sets whether the OmniBook suspends after undocking.
Sets whether the OmniBook turns on after docking.
Shows the order of boot devices. Move the entries to change
the order.
Saves Setup changes, exits, and reboots.
Discards Setup changes since last save, exits, and reboots.
Does not affect Security and date/time changes.
Restores default settings, stays in Setup. Does not affect
Security and date/time settings.
Discards Setup changes since last save, stays in Setup. Does
not affect Security and date/time changes.
Saves Setup changes, and stays in Setup. Security settings
are saved when changed.
Troubleshooting and Diagnostics
Default
Max Power
Savings
Off
2 minutes
4 minutes
4 hours
2 minutes
Disabled
Suspend
Turn Off LCD
Enabled
Disabled
When Lid Closed
Enabled
Default
1. Diskette drive
2. Hard drive
3. CD-ROM/DVD
drive
3-25