Figure 2-5. Removing The Lcd Module - HP OmniBook 900 Service Manual

Screw cover
Screw, M3×4mm
LCD module
LCD flex cable
Reassembly Notes
• Make sure the LCD module and flex cable have small foam pads present to ensure good
connections:
Two pads on the back of the LCD module on the internal connections near the top-left and
bottom-left corners. If a pad is missing, replace the LCD module.
One pad on the LCD flex cable behind the connector that plugs into the LCD module. If the
pad is missing, replace the flex cable.
HP OmniBook 900

Figure 2-5. Removing the LCD Module

Bumper (oval)
Screw, M3×6mm
Bezel
Display case
Power cable
Removal and Replacement 2-9