About These Instructions; Symbols Used; Use As Directed; Declaration Of Conformity - Blaupunkt Brisbane SD48 Operating And Installation Instructions

About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
• Read these instructions carefully and
completely before using the device.
• Keep the instructions at a location so
that they are always accessible to all
users.
• Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
Use as directed
This device is intended for installation and
operation in avehicle with 12 Vvehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the 'performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that the
Brisbane 5048 device complies with the
basic requirements and the other relevant
regulations of the directive 89/336/EWG.
DANGER!
Warns about injuries
DANGER!
Warns about accidents
A.
DANGER!
~,
Warns about hearing loss
CE
The CE mark confirms the com-
pliance with EU directives.
.... Identifies asequencing step
• Identifies a listing
6