1. Manuals
  2. Brands
  3. Zebex Manuals
  4. Handhelds
  5. Z-2065 series
  6. User manual

Zebex Z-2065 series User Manual

Windows ce.net handheld computer
Hide thumbs Also See for Z-2065 series:
Table of Contents

Advertisement

Quick Links

Download this manual
ZEBEX INDUSTRIES INC.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-2065 series and is the answer not in the manual?

Questions and answers

Related Manuals for Zebex Z-2065 series

Summary of Contents for Zebex Z-2065 series

  • Page 1 ZEBEX INDUSTRIES INC.

  • Page 2: Editorial Record

    Ver 3.00 2011/8/19 Corrected General Guide Ver 4.00 2013/7/23 41~61 Updated PowerPack section Ver 4.00 2014/9/19 Corrected item 8 to SIM card slot      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 1 / 70...

  • Page 3: Table Of Contents

    Connecting via the RS232 ................20 Connecting via USB Cradle ................21 Inserting SD Card....................22 Remove the SD Card .................... 22      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 2 / 70...
  • Page 4 Phone Number ...................... 36 Set Dial Properties ....................37 Connect to GPRS Service..................39 Disconnect GPRS Service ..................40 Using the Zebex PowerPack..................41 Backlight........................ 41 Calculator ......................43 File Transfer ......................44 Ex. File Transferred Operation By Using Bluetooth......... 45 Function Key Manager...................

  • Page 5: Preface

    ZEBEX INDUSTRIES INC. Preface About This Manual Thank you for your purchase of the ZEBEX Z-2065 series handheld computer. ZEBEX Z-2065 series product is at the forefront of handheld computer technology, and this manual will provide the necessary information on the many and varied options available to you.

  • Page 6: Copyright

    ZEBEX INDUSTRIES INC. Copyright ZEBEX Industries Inc. makes no warranty of any kind with regard to this material. Including but not limited to the imply warranties of merchantability and fitness for a particular purpose. ZEBEX Industries Inc. shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, Performance or use of this product.

  • Page 7: Safety Information

    Laser Safety The Z-2065 series handheld computer complies with safety standard IEC825-1(1993) for a Class 2 laser product. It also complies with U.S.21CFR1040 as applicable to a Class II laser product. Avoid staring at direct laser light as the laser beam may hurt your eyes.

  • Page 8: Caution

    Dropping and Damage Should the drop the device and damage it, immediately turn off the power and contact your original dealer or an authorized ZEBEX service provider. Continued use creates the danger of fire and electrical shock. Abnormal Conditions Should the device become hot or start to emit smoke or an original dealer or an authorized ZEBEX service provider.

  • Page 9: Fcc Statement

    RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 8 / 70...

  • Page 10: Unpacking

    RS-232 DB9 (F) Cable USB cable Hand Strip (Terminal connect to PC USB port) Hand strip Holder Battery Pack Sling for stylus Pen      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 9 / 70...

  • Page 11: Optional Parts

    ZEBEX INDUSTRIES INC. Optional Parts Cradle package Docking Cradle RS232 cable AC Adapter USB cable (Cradle to USB)      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 10 / 70...

  • Page 12: Purchasable Accessories

    RS-232 DB9 (F) Cable U.S. Plug head USB cable (Cradle to USB) Australia Plug head Battery Pack Europe Plug head Stylus Pen      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 11 / 70...
  • Page 13 ZEBEX INDUSTRIES INC. Hand Strip for stylus Pen Sling for stylus Pen Hand strip Holder      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 12 / 70...

  • Page 14: General Guide

    For touch screen operation and press RESET switch. Hand strip Protects the Handheld Terminal to drop. Battery Main battery Sling for stylus pen Sling      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 13 / 70...
  • Page 15 4. Press after SF/Fn key and press F1-F4 key to perform F5 - F8 key. Press to add a tab indention. Tab key Press to add a space character. Space key      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 14 / 70...

  • Page 16: Getting Started

    Insert the battery pack as shown and watch the battery direction. Remove the Battery Push the side lock to pick up the battery pack.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 15 / 70...

  • Page 17: Charging The Battery

    Connect the charging cable and AC adaptor as shown. Charging by cradle Cradle - rear view AC Power USB interface Adapter Jack In RS232/COM port Interface      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 16 / 70...

  • Page 18: Cradle Leds

    The LED lit when the cradle is connected to AC power. Charging the battery separately in the cradle Insert the battery into the compartment at the rear of the cradle.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 17 / 70...
  • Page 19 Connect the power jack to the cradle and plug AC adapter into the socket. NOTES When charging the battery for the first time, charge for at least 12 hours prior to use.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 18 / 70...

  • Page 20: System Reset

    Cold reset will erase ALL pre-configured data on the scanner. Check carefully to make sure you have uploaded all important files to your PC before proceeding with the reset.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 19 / 70...

  • Page 21: Pc System Requirements

    In order to use the software supplied with the Z-2065, the mobile data terminal must be connected to a PC. Connecting via the RS232      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 20 / 70...

  • Page 22: Connecting Via Usb Cradle

    The cradle must also be connected via one of your PC’s USB ports. Attach one end of the cable to the USB interface on the cradle and the other to your PC.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 21 / 70...

  • Page 23: Inserting Sd Card

    1. Make sure the power is turn off. 2. Open the SD Slot cover as shown, Take off the SD card. 3. Closed the SD slot cover.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 22 / 70...

  • Page 24: About The Product

    ZEBEX INDUSTRIES INC. About The Product ZEBEX Z-2065 WinCE.NET Handheld Computer comes with the one and only Jacket-module design, and makes most user friendly features to select as desired. The Jacket-module is a module at the back of device that is selectable in GPRS, GPS, RFID, WLAN or Bluetooth communications and 1D or 2D scanning engine, it satisfies all application from indoor to outdoor and from warehouse to transportation logistics.

  • Page 25: Hardware Required

    ZEBEX INDUSTRIES INC. Hardware Required The following models of the ZEBEX Z-2065 series and the dedicated options are available. Available models and the features: Barcod WLAN GPRS RFID(H) Model P/N(include accessory) & GPS(S) 2D(SE4500) 2.5G P/N (device only) BT(WL) Z-2065W L1 ◆...
  • Page 26 Single slot USB / RS-232 charging cradle with spare battery slot Software &Development Microsoft VC 6.0 development environment Supports SDK for program development      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 25 / 70...

  • Page 27: Using Barcode Scanner

    Once in the correct position, press the SCAN button. An audible alarm is heard and the barcode digits will appear on the LCD screen if the scan is successful.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 26 / 70...

  • Page 28: Using Rfid Scanner (Optional)

    RFID scan module was installed in the back of terminals. The devices can read from 30 to 50mm distance from the back-side of terminals.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 27 / 70...

  • Page 29: To Scan A Rfid

    4. If user need to switch to another UID type, UID type by can be cancel by pressing “Stop” button. Then user can select another UID type as demand.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 28 / 70...

  • Page 30: Rw 15693

    Confirm written data by pressing “Write Block” button. 4. Information appear at bottom can be clear by pressing “Clear” button.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 29 / 70...

  • Page 31: Rw Mifare

    Card ” button. UID will display in red circle shown in below diagram. 2. To perform read and write commands, please refer to “RW 15693” sections.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 30 / 70...

  • Page 32: Ultralight

    2. To write UID card, write the data into the column next to the “Write” button. Confirm written data by pressing “Write” button.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 31 / 70...

  • Page 33: Terminal Gprs User's Guide

    1. Click “Network and Dial-Up Connections” in the settings. Show as below figures. 2. Click “Make New Connection” to create the new connection. Show as below figures.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 32 / 70...
  • Page 34 3. Select the “Dial-Up Connection” and press” Next” button to make anew connection. Show as below figure. 4. Press “Next“ button to select the modem.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 33 / 70...

  • Page 35: Set Connection Properties

    1. Select Internal GPRS Modem and press the “Configure” button to change the settings of properties. 2. Change the Baud Rate to 115200 in Port Settings. Show as below figure.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 34 / 70...
  • Page 36 APN around the work, please refer below link: http://www.quickim.com/support/gprs-settings.html 4. Press “OK” button to complete the settings. 5. Press “Phone Number” button to set the phone number.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 35 / 70...

  • Page 37: Phone Number

    *99***1#. This number depends on the service provider. Show as below figure. 2. Press OK button to finish the settings of new connection.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 36 / 70...

  • Page 38: Set Dial Properties

    ZEBEX INDUSTRIES INC. Set Dial Properties 1. Double Click the connection. 2. Press the “Dial Properties” button.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 37 / 70...
  • Page 39 3. Create new one or select one setting in the Location and press the “Edit” button. 4. Set the Dialing Patterns as below figure.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 38 / 70...

  • Page 40: Connect To Gprs Service

    2. During the Dial-Up. The screen shows the status as below figure. 3. It shows below figure when connected to GPRS service.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 39 / 70...

  • Page 41: Disconnect Gprs Service

    ZEBEX INDUSTRIES INC. Disconnect GPRS Service 1. Double click the connection icon in taskbar. 2. Press the “Disconnect” button.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 40 / 70...

  • Page 42: Using The Zebex Powerpack

    ZEBEX INDUSTRIES INC. Using the Zebex PowerPack To save your time and effort in developing applications on Z-2065, ZEBEX provides it’s own design system management tool to called “PowerPack” to let you control it directly. The PowerPack management tools which installs in each of our WinCE product. It is free charge for you.
  • Page 43  Always ON: This function can set up the keypad backlight to be always on until the system into suspend mode.  Always OFF: This function can set up the backlight to be always off.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 42 / 70...

  • Page 44: Calculator

    － : Subtraction function. ＋ : Addition function. ﹒ : A decimal point of dot. ＝ :To be equal to, The amount.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 43 / 70...

  • Page 45: File Transfer

    2. Select Transfer File Select file need to be transferred, press bottom for selecting file. 3. Start Transfer : Start transferring file to targeted devices.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 44 / 70...

  • Page 46: Ex. File Transferred Operation By Using Bluetooth

    2. Select Bluetooth devices for receiving file, select “Connect” for connecting with devices, or select “Disconnect” to disconnect with current devices.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 45 / 70...
  • Page 47 3. Click ” … ” bottom to select the file need to be transferred, then click ”OK ” bottom to confirm. Select “Start Transfer” bottom to start file transferring.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 46 / 70...

  • Page 48: Function Key Manager

    F1: SIP ON/OFF。 F2: Backlight Manager。 F3: Power Switch。 F4: Calculator.exe。 F5: Volume + 。 F6: Volume -。 F7: Backlight +。 F8: Backlight -。      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 47 / 70...

  • Page 49: Function Key Manager Set Up Instruction

     Copy  Paste Program File : Install application program according to demand, this function can be used for setting up auto-execution.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 48 / 70...
  • Page 50 1. Select items need to be modified, select by clicking ”Edit” bottom to enter set up window as below: 2. Select new functional item and complete editing.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 49 / 70...
  • Page 51 1. Select Program File item，then click ”Browse” bottom to enter File 2. Opening Window. 3. Select software required auto-execution, then select “OK” bottom to complete selecting process.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 50 / 70...

  • Page 52: Gps Information

    The GPS Information allows operators to view GPS status and to setup the GPS function during suspension. Check/uncheck the “Keep Power During Suspend” check box to enable/disable the function.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 51 / 70...

  • Page 53: Preload Manager

    ZEBEX INDUSTRIES INC. Preload Manager The Preload Manager is an auto execution program after system boot for ZEBEX’s WinCE device. You may set programs into the Preload list box and running the program by automatically or manually. Modify Window located on top of display, providing functionalities of Priority, Remove and Browse.

  • Page 54: Preload Operation

    Programs can be selected more than once. 2. Confirming file by clicking “OK” will get back to Preload Manager main page. Then complete its process.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 53 / 70...
  • Page 55 2. Then select by clicking check everything program and click “Down” bottom to move down check everything program.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 54 / 70...

  • Page 56: Rfid

    In order to remove “open explorer” program, select by clicking program, then select “Remove” by clicking on bottom to finish command. RFID Please see Using RFID Scanner (Optional) for more information.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 55 / 70...

  • Page 57: Switch

    Under the content of “Profile”, the available wireless network access point will be searching by clicking “Scan” button. You can select an access point and press “Configure” button to connect with that network.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 56 / 70...
  • Page 58 Existing Profile lists can be viewed existing profile by clicking “List” button, check profile and click on “OK” button. Select “On” from Auto Profile menu to complete Auto Profile setting.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 57 / 70...

  • Page 59: Scan Manager

     None(copy to clipboard): Function provide required barcode information to application program, after this function was activated, scanner will read barcode information and save data into clipboard.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 58 / 70...
  • Page 60  UTF-8 conversion: Check/uncheck to enable/disable the function.  Suffix: Set the suffix character with barcode data.  Prefix: Set the preamble character with barcode data.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 59 / 70...
  • Page 61 "Properties" tab on top to see the barcode parameter value of each kind of barcode. The default values of EAN/UPC code and Code39:      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 60 / 70...

  • Page 62: Backup/Restore

    Flash Disk when there is no storage card. When Mini SD Card was installed into devices, program will auto-search and provides selection of SD Card from menu.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 61 / 70...
  • Page 63 Backup time may vary depending on the size of data you have on the device.  When restoring system, you must select “Yes” to warm boot the device to complete the process.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 62 / 70...

  • Page 64: Firmware Information

    You can find this application is located on path " \settings\control Panel\". This information is good for identify device firmware version for future update or maintenance.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 63 / 70...

  • Page 65: How To Order

    ZEBEX INDUSTRIES INC. How to order Please offer Part Number or Model Name for next purchase. 1. Z-2065 Series Windows CE.NET Handheld Computer Set. Part Number Model Name Description WindowsCE.NET Handheld Computer, 882-65W100-100 Z-2065WL1 W/Wireless LAN/BT module/1D engine/RS-232 DB9(F) cable / USB interface WindowsCE.NET Handheld Computer,...
  • Page 66 Z-2065 hand strip holder 11S-900180-008 AC Adapter AC 100~240V 50/60HZ 0.6A, DC 9V/2A 11S-000000-008 Integrated Plug head for 11S-900180-008 Type: Britain/ U.S./Australia/Europe      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 65 / 70...
  • Page 67 8 RTS (Request to send) 7 CTS (Clear to send) RJ45 USB type B cable connect from 173-0U3000-150 USB Cable CRD-60 to PC USB port.      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 66 / 70...
  • Page 68 ZEBEX INDUSTRIES INC. 3. Z-2065 Series Optional Accessories Part Number Model Name Description 170-70R449-180 RS-232 cable RS232 charging cable for Z-2050/2065 PIN-OUT configuration DB-9 (Female) CD (Carrier detect) TxD (Transmit data) RxD (Receive data) DSR (Data set ready) GND (Signal ground)
  • Page 69 Australia type head ,interchangeable 11S-000002-008 Adapter Head plug, for 11S-900180-008 AC adapter Europe type head ,interchangeable 11S-000003-008 Adapter Head plug, for 11S-900180-008 AC adapter      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 68 / 70...
  • Page 70 ZEBEX INDUSTRIES INC. << MEMO >>      Subject Version Date Page Z-2065 series User’s Manual 4.00 2014/9/19 69 / 70...

This manual is also suitable for:

Z-2065wl1Z-2065wl2Z-2065w1gsZ-2065w2gsZ-2065w1gshZ-2065w2gsh ... Show all

Table of Contents