1. Manuals
  2. Brands
  3. Zebex Manuals
  4. Handhelds
  5. Z-2070 series
  6. User manual

Zebex Z-2070 series User Manual

Handheld computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Handheld Computer
Z-2070
series
( Version 3.0)
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-2070 series and is the answer not in the manual?

Questions and answers

Related Manuals for Zebex Z-2070 series

Summary of Contents for Zebex Z-2070 series

  • Page 1 Handheld Computer Z-2070 series ( Version 3.0) User’s Manual...
  • Page 2 ZEBEX INDUSTRIES INC. Editorial Record Version Date of edited Page Content Ver2.00 2008/3/2 25~46 Add Using the Zebex Power Pack Ver2.00 2008/3/2 47~51 Add How to order Updated Zebex Power Pack Function and Ver3.00 2010/1/25 26~49 Picture. Ver3.00 2010/1/26 26~28...

  • Page 3: Table Of Contents

    About The Product ....................22 Prerequisites ....................23 Specifications Using Barcode Scanner ..................24 Scanning Barcodes Using RFID Scanner ....................26 Scanning RFID Using Zebex Power Pack Backlight ........................29 Calculator ........................31 Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 3 / 58...
  • Page 4 Preload operation ......................36 Switch ..........................39 Scan Manager …..……………………………………………………………………. .41 Backup/Restore ......................45 Firmware Information ..................... 47 Function Key Manager ....................48 How to order ………………………………………………………………………………..53 Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 4 / 58...

  • Page 5: About This Manual

    ZEBEX INDUSTRIES INC. Preface About This Manual Thank you for your purchase of the ZEBEX Z-2070 handheld computer. ZEBEX Z-2070 product is at the forefront of handheld computer technology, and this manual will provide the necessary information on the many and varied options available to you.

  • Page 6: Copyright

    ZEBEX Industries Inc. will be under no liability in respect of any defect arising from fair wear and tear, willful damage, negligence, abnormal working conditions, failure to follow the instructions and warnings, or misuse or alteration or repair of the products without written approval.

  • Page 7: Safety Operation

    WARNING Disassembly and Modification Never try to disassemble or modify the device in any way. All servicing should be carried out be qualified Zebex personnel or Zebex- approved engineers. Interior Parts and Components Never touch interior high voltage parts or components. Doing so creates the danger of electrical shock.

  • Page 8: Federal Communication Commission (Fcc) Statement

    End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 8 / 58...

  • Page 9: Unpacking Package Contents

    Type: North America/Japan/ Taiwan/Europe Mobile Data Terminal USB cable Stylus Pen (Terminal connect to PC USB port) Sling (for stylus Pen) Battery Pack Hand Strip Hand strip Holder Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 9 / 58...

  • Page 10: Optional Parts

    ZEBEX INDUSTRIES INC. Optional Parts Cradle package Docking Cradle RS232 Cable (Connect from cradle tp PC) Travel charger USB cable (From Cradle to PC USB port) Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 10 / 58...

  • Page 11: Purchaseable Accessories

    (Terminal connect to PC USB port) Britain Plug head RS232 Cable U.S. Plug head USB cable (From Cradle to PC USB port) Australia Plug head Main Battery Stylus Pen Europe Plug head Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 11 / 58...
  • Page 12 ZEBEX INDUSTRIES INC. Sling (for stylus Pen) Hand Strip Hand strip Holder Britain Adapter Head Australia Adapter Head Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 12 / 58...

  • Page 13: General Guide

    For touch screen operation and needle for press RESET Stylus pen switch. Hand strip Protects the Handheld Terminal to drop. Battery Main battery Communication port Communication with PC or charge by USB port Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 13 / 58...

  • Page 14: Using The Keypad

    Power 2. Press more then 3 seconds for turn the terminal power off and go into the suspend mode. Escape key Press to perform a cancel action. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 14 / 58...

  • Page 15: Getting Start

    Inserting the Battery Insert the battery pack as shown and watch the battery direction.. Remove the Battery Push the side lock to pick up the battery pack. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 15 / 58...

  • Page 16: Charging The Battery

    Connect the charging cable and USB AC adaptor as shown. Charging by cradle USB Interface AC Power Adapter Jack In RS232/COM port Interface Cradle - rear view Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 16 / 58...

  • Page 17: Cradle Leds

    It remains lit until the charge is complete. Right LED - The LED lit when the cradle is connected to AC power. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 17 / 58...

  • Page 18: Charging The Battery Separately In The Cradle

    Connect the power jack to the cradle and plug AC adapter into the socket. NOTES When charging the battery for the first time, charge for at least 12 hours prior to use. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 18 / 58...

  • Page 19: System Reset

    Cold reset will erase ALL pre-configured data on the scanner. Check carefully to make sure you have uploaded all important files to your PC before proceeding with the reset. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 19 / 58...

  • Page 20: Pc System Requirements

    The cradle must also be connected via one of your PC’s USB ports. Attach one end of the cable to the USB interface on the cradle and the other to your PC. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 20 / 58...

  • Page 21: Connecting The Z-2070 Directly Via Usb Cable

    You can connect the Z-2070 directly to your PC, without the need for the cradle, using the Mini USB cable, attaching it to the port on the left hand side of the device. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 21 / 58...

  • Page 22: About The Product

    Prerequisites Skills Required The following skills are required by developers aiming to develop application software for the ZEBEX Z-2070 series. ● Windows programming ● Good knowledge of one or more of the following: * Visual C++ * Visual Basic .NET * Visual studio .NET...

  • Page 23: Specifications

    Single slot USB / RS-232 charging cradle with spare battery slot Software &Development Microsoft VC 6.0 development environment Supports GUI, database and networking over 1,000 API Emulation software tool for program development and debug Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 23 / 58...

  • Page 24: Using Barcode Scanner Scanning Barcodes

    1. Position the laser scanner close to the barcode when scanning small barcodes. And position it is a distance from the barcode when scanning large barcodes 2. The reader can be detected by a red beam. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 24 / 58...
  • Page 25 Scanning operations may fail if the laser beam position as below. Note: this product scans using laser light. Never look directly into the laser light or shine the laser light into the eyes. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 25 / 58...

  • Page 26: Using Rfid Scanner

    ZEBEX INDUSTRIES INC. Using RFID Scanner Scanning RFID To open Zebex RFID demo program, you can find program located on following path: “My Device\Flash Disk\RFID\RFID_ADJ\”. RFID Scanning Position RFID scan module was installed in the back of terminals. The devices can read from 30 to 50mm distance from the back-side of terminals.
  • Page 27 ZEBEX INDUSTRIES INC. To scan a RFID After opening Zebex RFID demo program, you will see main menu displayed as below. There are three main functionalities such as “Read UID”, “RW 15693”, and “RW Mifare”. Please follow below steps to read UID.
  • Page 28 1) Place UID card within valid range, check UID by pressing “ Open Card ” button. UID will display in red circle shown in below diagram. 2) To perform read and write commands, please refer to “RW 15693” sections. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 28 / 58...

  • Page 29: Using Zebex Power Pack

    ZEBEX INDUSTRIES INC. Using the Zebex PowerPack To save your time and effort in developing applications on Z-2070, ZEBEX provides it’s owndesign system management tool to called “PowerPack” to let you control it directly. The PowerPack management tools which installs in each of our WinCE product.
  • Page 30 Always OFF: This function can set up the backlight to be always off. 3. Brightness Control Bar The brightness of the backlight can be changed via control bar. Put up to light and put down to dark. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 30 / 58...

  • Page 31: Calculator

    : Division function. : Multiplication function. ＊ : Subtraction function. － : Addition function. ＋ : A decimal point of dot. ﹒ ＝ :To be equal to, The amount. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 31 / 58...

  • Page 32: File Transfer

    : For disconnecting with current devices. 2. Select Transfer File Select file need to be transferred, press bottom for selecting file. Start Transfer : Start transferring file to targeted devices. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 32 / 58...

  • Page 33: File Transfer Operation

    1.2 Select Bluetooth devices for receiving file, select “ Connect ” for connecting with devices, or select “ Disconnect ” to disconnect with current devices. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 33 / 58...
  • Page 34 Click ” … ” bottom to select the file need to be transferred, then click ” OK ” bottom to confirm. 1.4 Select “ Start Transfer ” bottom to start file transferring. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 34 / 58...

  • Page 35: Preload Manager

    ZEBEX INDUSTRIES INC. Preload Manager The Preload Manager is an auto execution program for ZEBEX’s WinCE device. You may set programs into the Preload list box and running the program by automatically or manually. 1. Modify Window located on top of display, providing functionalities of Priority, Remove and Browse.

  • Page 36: Preload Operation

    Programs can be selected more than once. Confirming file by clicking “OK” will get back to Preload Manager main page. Then complete its process. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 36 / 58...
  • Page 37 Therefore, play music.exe will be shifted up. 2.2 Then select by clicking check everything program and click “Down” bottom. Therefore, check everything program will be shifted down. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 37 / 58...
  • Page 38 ZEBEX INDUSTRIES INC. 3. Remove a program: In order to remove “open explorer” program, select by clicking program, then select “Remove” by clicking on bottom to finish command. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 38 / 58...

  • Page 39: Switch

    The available wireless network access point will be searching automatically when you check the selection for enable WiFi function. You can select an access point and press “ ” button to connect with that network. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 39 / 58...
  • Page 40 You also can use " " or " " button for display more information for network setting. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 40 / 58...

  • Page 41: Scan Manager

    Below are instructions of functions on main page: 1. Output Mode Providing three output methods such as Copy & Paste / Key Emulation / None (Copy to Clipboard). Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 41 / 58...
  • Page 42 To set the barcode parameter value of each kind of barcode for barcode scanner. Press the" Setting " button in TrayScan application to start the barcode setting. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 42 / 58...
  • Page 43 " button to setting the barcode parameter value of each kind of barcode. Press " "button to use system default value to set up the barcode parameter. The default value was show in below pictures. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 43 / 58...
  • Page 44 ZEBEX INDUSTRIES INC. The default values of EAN/UPC code and Code39. The default values of ITF 2 of 5 code and Code128. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 44 / 58...

  • Page 45: Backup/Restore

    Flash Disk when there is no storage card. When Mini SD Card was installed into devices, program will auto-search and provides selection of SD Card from menu. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 45 / 58...
  • Page 46 ZEBEX INDUSTRIES INC. Backup : Select backup data as saved devices, press ” Backup ” bottom to proceed backup. Display will restore when backup was finished. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 46 / 58...

  • Page 47: Firmware Information

    PowerPack utility. You can find this application is located on path " \settings\control Panel\". This information is good for identify device firmware version for future update or maintenance. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 47 / 58...

  • Page 48: Function Key Manager

    F1: SIP ON/OFF。 F2: Backlight Manager。 F3: Power Switch。 F4: Calculator.exe。 F5: Volume + 。 F6: Volume -。 F7: Backlight +。 F8: Backlight -。 Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 48 / 58...
  • Page 49 Volume + Volume – Backlight + Backlight – Copy Paste Program File : Install application program according to demand, this function can be used for setting up auto-execution. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 49 / 58...
  • Page 50 1.1 Select items need to be modified, select by clicking ” Edit ” bottom to enter set up window as below: 1.2 Select new functional item and complete editing. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 50 / 58...
  • Page 51 2.1 Select Program File item，then click ” Browse ” bottom to enter File Opening Window. 2.2 Select software required auto-execution, then select ” OK ” bottom to complete selecting process. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 51 / 58...
  • Page 52 ” OK “ bottom to complete editing process. When Function Key Manager Main Page reappear on the display, F1 on function key item lists had been updated to testkeypadChar. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 52 / 58...

  • Page 53: How To Order

    ZEBEX INDUSTRIES INC. How to order Please offer Part Number or Model Name for next purchase. 1. Z-2070 Series Windows CE.NET Handheld Computer Set. Part Number Model Name Description Windows CE.NET Handheld Computer, TFT 2.4”QVGA Z-2070BA 882-7000UB-000 color display, 64MB SDRAM64MB F-ROM WindowsCE.NET Handheld Computer, TFT 2.4”QVGA...
  • Page 54 8 RTS (Request to send) 10 GND(Signal ground) 9 RI (Ring indicator) 173-0U3000-150 USB Cable RJ45 USB type B cable connect from CRD-70 to PC USB port. Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 54 / 58...
  • Page 55 ZEBEX INDUSTRIES INC. 3. Z-2070 Series Optional Accessories Part Number Model Name Description USB type A, 180cm for Z-2070connect to USB cable 170-70U300-180 PC USB port. PIN-OUT configuration DB-9 (Female) CD (Carrier detect) TxD (Transmit data) DC Jack: For battery charge...
  • Page 56 11S-900180-008 AC adapter Australia type head ,interchangeable Adapter Head 11S-000002-008 plug, for 11S-900180-008 AC adapter Europe type head ,interchangeable Adapter Head 11S-000003-008 plug, for 11S-900180-008 AC adapter Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 56 / 58...
  • Page 57 11S-500503-U10 cable(Type: Europe) WA-7 switch head for travel charger, Adapter Head 11S-900000-007 Britain type head WA-17 switch head for travel charger, Adapter Head 11S-900002-007 Australia type head Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 57 / 58...
  • Page 58 ZEBEX INDUSTRIES INC. << MEMO >> Subject Version Date Page Z-2070 series User’s Manual 3.00 2010/1/26 58 / 58...

Table of Contents