General Installation Information; Connection Load - Star 20C Installation And Operation Instructions Manual

GENERAL INSTALLATION INFORMATION

The grill should be connected to a wall type receptacle, a direct line or individual branch circuit. An
individual branch circuit is preferred. If connected to an overloaded circuit the grill will not
operate properly. The unit should be level when installed. Models equipped with bun boxes must be
level to utilize the self-closing feature of the bun drawer. Adjustable 4-inch legs are standard on the 75
series and available for all other models.
This grill is equipped for the voltage shown on the nameplate.
It will operate on alternating current only, however, the specified voltage must be applied.

CONNECTION LOAD:

MODEL SERIES
20C, 20SC
30C, 30SC, 30CF, 30SCF, 30CBB,
30CBBC, 30SCBB, 30CDV
45C, 45SC, 45CBB, 45SCBB, 45CDV
50C, 50SC, 50CF, 50SCF, 50CBB,
50CBBC, 50SCBB, 50CDV
54IC, 54ISC
75C, 75SC, 75CBB, 75SCBB,
75FF, 75SCF 208/240V
75C, 75SC, 75CBB, 75SCBB,
75CDV 230V
75C, 75CF, 75SC, 75SCF, 75CBB,
75SCBB, 75CDV 120V
75CFV 120V
90IC, 90ISC 208V
90IC, 90ISC 240V
DO NOT CONNECT TO DIRECT CURRENT (DC).
WARNING
UNLEVEL UNITS COULD RESULT IN HAVING PRODUCT TRAVEL FROM ONE SIDE
TO THE NEXT, OVER A PERIOD OF TIME.
INFINITE CONTROL
1810/2400
IMPORTANT
MODEL SERIES
WATTAGE
20SCE
930
30CE, 30SCE, 30SCEX, 30CBBE
1150
30SCBBE
1650
45SCE, 45SCRE
50CE, 50SCE, 50SCEX 50CBBE,
1535
50SCBBE, 50CBBES
1760
54ICE, 54ISCE
75CE, 75SCE, 75CBBE, 75CBBES,
75SCBBE, 75SCRE 208/240V,
75SCFE
2210
75CE, 75SCE, 75CBBE,
75SCBBE, 75SCRE 120V
1700
90ICE, 90ISCE 208V
2880
90ICE, 90ISCE 240V
2133
2840
4
ELECTRONIC CONTROL
WATTAGE
930
1150
1650
1535
1760
1810/2400
1730
2133
2840