General Installation Information; Connection Load - Star Grill-Max 30 CBD Installation And Operation Instructions Manual

GENERAL INSTALLATION INFORMATION

The grill should be connected to a wall type receptacle, a direct line or individual branch circuit. An
individual branch circuit is preferred. If connected to an overloaded circuit the grill will not operate
properly. The unit should be level when installed. Models equipped with bun boxes must be level to
utilize the self-closing feature of the bun drawer. Adjustable 4-inch legs are standard on the 75 series
and available for all other models.
This grill is equipped for the voltage shown on the nameplate. It will operate on alternating current
only, however, the specified voltage must be applied.

CONNECTION LOAD:

MODEL SERIES
30CBD, 30SCBD
30CHD, 30SCHD
45CBD, 45SCBD
45CHD, 45SCHD
50CBD, 50SCBD
50CHD, 50SCHD
75CBD, 75SCBD
75CHD, 75SCHD
DO NOT CONNECT TO DIRECT CURRENT (DC).
WARNING
UNLEVEL UNITS COULD RESULT IN HAVING PRODUCT TRAVEL FROM ONE
SIDE TO THE NEXT, OVER A PERIOD OF TIME.
INFINITE CONTROL
IMPORTANT
4
MODEL SERIES
WATTAGE
30CBDE, 30SCBDE
1150
1230 30CHDE, 30SCHDE
1650
45CHDEP
1730
50CBDE, 50SCBDE
1535
50CHDE, 50SCHDE
1635
75CBDE, 75SCBDE
1730
75CHDE, 75SCHDE
1830
75SCHDEP
ELECTRONIC CONTROL
1920/2560
WATTAGE
1150
1230
1650
1535
1635
1730
1830