Dpof Print Setting - JVC GZ-MG20U Getting Started

46
MANAGING FILES
EN

DPOF Print Setting

This camera is compatible with DPOF (Digital
Print Order Format). You can set which images
to be printed and the number of prints with this
camera. This feature is useful to print with a
DPOF-compatible printer or bring a recording
medium to photo lab for print.
To print by selecting a still image
1
Set the power switch to
2
Set the MODE switch to
3
Press MENU. The menu screen appears.
4
Press / to select [DPOF], then press
49. The DPOF menu screen appears.
5
Press / to select [SELECT IMAGES],
then press 49.
6
Press / / /
select the desired file,
then press 49.
The scroll bar can also
be used with the zoom
lever and pressing
. ( pg. 30)
If you slide and hold the zoom lever towards T, the
preview screen of the still image is displayed.
7
Press / to select
the number of prints
(max. 15 prints), then
press 49.
To set print information
for other images, repeat
6 7
steps and .
8
Press MENU to finish
the setting.
To cancel the selection, select the same image in
6
step .
NOTES:
The DPOF setting is available up to 999 images.
DPOF printing can only be specified for still
images stored on the SD card. To specify still
images stored on the hard disk, you must first
copy the image files onto the SD card before
setting printing. (
The date index function cannot be used.
.
.
to
DPOF TOTAL: 125
01 02
00 00
/
15 00
DPOF TOTAL: 125
01 02
00 00
15 00
Number of prints
pg. 41)
To print all still images (One print for each)
1
Display the DPOF menu screen. (
by selecting a still image")
2
Press /
49.
3
Press /
press 49.
4
Press MENU to finish the setting.
To confirm the DPOF setting
1
Display the DPOF menu screen. (
by selecting a still image")
2
Press /
then press 49.
3
If necessary, change the number of prints for
the desired file by following the steps 6 to 7 in
"To print by selecting a still image".
4
Press MENU to return to the previous menu.
7/59
To reset the DPOF setting
00
1
Display the DPOF menu screen. (
05
by selecting a still image")
2
00 Press /
49.
3
Press /
press 49.
7/59
4
Press 49 to finish the reset.
00
05
00
to select [ALL1], then press
to select [EXECUTE], then
to select [CHECK SETTINGS],
to select [RESET], then press
to select [EXECUTE], then
"To print
"To print
"To print