JVC GZ-MG20U Getting Started page 49

REMOTE
OFF: Makes the camera not to receive the signal
from the remote control.
[ON]: Enables the operation with the remote
control.
DROP DETECTION
OFF: Disables the function.
[ON]: Turns off the power automatically to
prevent HDD damage when the camera is
accidentally dropped. (
CAUTION:
Setting this function to off increases the chances of
damaging the internal hard disk if the camera is
accidentally dropped.
REC MEDIA SETTING
VIDEO MODE
[HDD] / SD
IMAGE MODE
[HDD] / SD
FORMAT
[HDD] / SD
You can format (initialize) the built-in hard disk or
SD cards. ( pg. 20)
CLEAN UP
[HDD] / SD
Writing speed of recording media tends to
become slow after long period of repeated use.
To regain the speed, execute cleanup
periodically. ( pg. 40)
COPY/MOVE
[COPY] / MOVE
You can copy or move still image files between
the built-in hard disk and SD card. (
pg. 21)
Media selection can
be set for each
recording and
playback mode: video
( ) or still image
( ).
HDD: The built-in hard
disk is selected as a
recording medium.
SD: SD card is
selected as a
recording medium.
pg. 41)
MENU SETTINGS
NO. RESET
[VIDEO] / IMAGE
By resetting the file number (name), a new folder
will be made. The new files you are going to
make will be stored in the new folder. (
BRIGHT
When this item is selected, the brightness
control indicator appears. Adjust the brightness
of the display using
( pg. 19)
DATE/TIME
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx.
5 seconds in the following cases.
When the power switch is set from OFF to
When playback starts
When the date is changed during playback
ON: The date/time is always displayed.
NOTES:
Only the date is displayed for the video playback.
You can set to different setting for each mode
(video recording/playback and still image
recording/playback).
SCENE COUNTER
[OFF]: Disables the function.
ON: Displays the counter during video mode.
LANGUAGE
[ENGLISH] / FRANÇAIS / ESPAÑOL /
PORTUGUÊS /
The language setting can be changed.
( pg. 18)
CLOCK ADJUST
"Date/Time Settings" (
EN
pg. 42)
DISPLAY
/ , then press 49.
pg. 18)
49